User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configure System Information
101
S3300 Smart Managed Pro Switch
information includes the system name, system description, system capabilities, and
port description. For information about how to configure the system name, see
Management o
n page 39. For information about how to configure the port description,
see Ports on p
age 136.
4. Click the Ap
ply button.
LLDP-MED Network Policy
This screen displays information about the LLPD-MED network policy TLV transmitted in the
LLDP frames on the selected local interface.
To view LLDP-MED network policy information for an interface:
1. Select System > LL
DP > Advanced > LLDP-MED Network Policy.
Figure 58. LLDP-MED Network Policy
2. From the Interface list, select the interface with the information to view.
Note: The list includes only the interfaces on which LLDP is enabled. If no
interfaces are enabled for LLDP, the Interface list does not display.
The screen refreshes and displays the data transmitted in the network policy TLVs. for the
interface. The following table describes the LLDP-MED network policy information that
displays on the screen.