Quick Reference Guide

Reference Guide for the Model RT338 ISDN Router
4-4 Initial Router Configuration
Reading the Current Configuration
After you have started FirstGear, the program accesses the router and reads the current
configuration.
To continue:
1.
If the router’s currently assigned password is anything other than the factory default password
(1234), enter the password in the password field.
If the current password is the default password, no action is required.
2.
Press [Return].
FirstGear reads the configuration of the router and displays the FirstGear Main Menu.
Using the Manager Interface Configuration Method
Turning On Power to the Router
When you turn on power to the router, it performs several internal tests and initializes your ISDN
line. If a serial connection with the internal Manager interface is established during the
initialization, the start-up display appears, as shown in Figure 4-1.
Figure 4-1. Start-up Display
Bootbase Version: V1.10 | 6/11/1999 13:42:08
RAM: Size = 4096 Kbytes
DRAM POST: Testing: 4096K OK
FLASH: Intel 8M
Press any key to enter debug mode within 3 seconds.
............................................................
(Compressed)
Version: V2.40(N.00), start: 02029030
Length: 154098, Checksum: 4DDC
Compressed Length: B591E, Checksum: 23ED
initialize ch =0, ethernet address: 00:a0:c5:00:20:aa
(1) USA:
Resetting ISDN ........................................
Press ENTER to continue...
Config.fm Page 4 Friday, October 6, 2000 5:22 PM