Quick Reference Guide

Reference Guide for the Model RT338 ISDN Router
3-10 Preparing Your Network
6.
Click OK.
The COM1 or COM2 Properties dialog box opens, as shown in Figure 3-3.
Figure 3-3. COM Port Properties Dialog Box
7.
In the COM1 or COM2 Properties dialog box, set the parameters shown in Table 3-1.
Table 3-1. Hyperterminal COM Port Properties
Parameter Setting
Bits per second: 9600 bps
Data bits: 8
Parity: None
Stop bits: 1 stop bit
Flow control: None
Prepare.fm Page 10 Friday, October 6, 2000 5:21 PM