Quick Reference Guide

Reference Guide for the Model RT338 ISDN Router
Preparing Your Network 3-7
Connecting with Microsoft Windows HyperTerminal
Follow the procedure in this section to establish a connection with the router using the
HyperTerminal application in Window 95, Windows 98, and Windows NT. This procedure creates
and saves a new HyperTerminal session file for the router. You can use this session file the next
time you connect with the router using the serial connection.
To connect with the router using Microsoft Windows HyperTerminal:
1.
Connect the router to your Windows PC using the serial cable.
See “Connecting Through a Serial Port” on page 3-6 for more information.
2.
Start Windows HyperTerminal.
Click Start and choose Programs > Accessories > Hyperterminal > HyperTerminal.
The HyperTerminal window and Connection Description dialog box open as shown in
Figure 3-1.
Prepare.fm Page 7 Friday, October 6, 2000 5:21 PM