Quick Reference Guide

Reference Guide for the Model RT338 ISDN Router
Configuring Filters 9-3
2.
Select the filter that you want to configure or choose an unused set to create a new filter.
In order to distinguish between the 12 filter sets, each filter set should have a name or
description. When you select a set for editing, you are prompted to provide descriptive text to
be displayed in the comment field of Menu 21 next to the filter number.
3.
When you have finished filling in the Edit Comments field, press [Enter] at the Press ENTER
to Confirm... prompt to confirm your selections, or press [Esc] at any time to cancel your
selections.
The new information is displayed in the read-only section of Menu 21 - Filter Set
Configuration.
When you press [Enter], a Filter Rules Summary menu opens as shown in Figure 9-3.
The menu number reflects the number of the rule that you selected to configure.
Figure 9-3. Menu 21.3 - Filter Rules Summary
The information in this menu is read-only; the parameters of each rule that you configured for
that set are displayed. Refer to Table 9-1, Table 9-2, and Table 9-3 for abbreviations used in
Menu 21.3 - Filter Rules Summary.
Menu 21.3 - Filter Rules Summary
# A Type Filter Rules M m n
- - ---- --------------------------------------------------------------- - -
-
1 N
2 N
3 N
4 N
5 N
6 N
Filter.fm Page 3 Friday, October 6, 2000 5:28 PM