Quick Reference Guide

Reference Guide for the Model RT338 ISDN Router
Remote Node Configuration 7-15
2.
Type 8 and press [Enter] to change to the Command Interpreter Mode.
3.
At the command prompt, type:
ip route stat [Enter]
The command interpreter displays the static IP routing table as shown in the example in
Figure 7-8.
Figure 7-8. IP Static Routing Table Example
4.
After viewing the table, type “exit” to return to the menus.
ras> ip rout stat
Dest FF Len Interface Gateway Metric stat Timer Use
192.168.0.0 00 24 enif0 192.168.0.1 1 041b 0 0
default 00 0 wanIdle MyISP 2 002b 0 0
ras>