Quick Reference Guide

Reference Guide for the Model RT338 ISDN Router
Remote Node Configuration 7-5
Outgoing:
My Login Name This is a required field if Call Direction is either Both or Out. Enter the login name
your router uses when it calls this remote node.
My Password This is a required field if Call Direction is either Both or Out. Enter the password
your router uses when it calls this remote node.
Authen This field sets the authentication protocol used for outgoing calls. Options for this
field are:
• CHAP/PAP—Router tries CHAP when CHAP is requested by the remote node
or PAP when PAP is requested by the remote node (Default).
• PAP—Use PAP only.
• CHAP—Use CHAP only.
Pri(mary) Phone
Number and
Sec(ondary)
Phone Number
Both the primary and secondary phone numbers refer to the number that the router
dials to connect to the remote node. The router calls the remote node using the
primary phone number first. If the primary phone number is busy or does not
answer, the router calls the secondary phone number if available. In some cases
the secondary number is the number your router dials to add additional bandwidth
for a Multilink call. Do not enter 1+area code unless it is required for local dialing.
In some areas, you must enter 1+area code with the number or the call is placed
as a 56K call.
Edit PPP Options To edit the PPP options for this remote node, move the cursor to this field, use the
space bar to select Yes, and press [Enter] to display Menu 11.2 - Remote Node
PPP Options. For more information about configuring PPP options, see “Editing
PPP Options” on page 7-7.
Rem IP Addr This field is required on all remote nodes except the ISP node. Enter the IP
address of the router at the remote site. A static route is created to the network
address of that router. Note that if the remote network uses a netmask other than
the standard class netmask, you must enter the netmask in the Edit IP Options
submenu.
Edit IP Options This field edits the parameters of the TCP/IP protocol. Select Yes and press [Enter]
to display Menu 11.3 - Remote Node Network Layer Options. For more information
about configuring PPP options, see “Editing IP Options” on page 7-10.
Table 7-1. Remote Node Profile Fields (continued)
Field Description