Quick Reference Guide

Reference Guide for the Model RT338 ISDN Router
Remote Node Configuration 7-3
To create a remote node:
1.
Enter 11 from the Main Menu to display Menu 11 - Remote Node Setup.
2.
Enter a remote node number (1 to 8) to edit the remote node and to display Submenu 11.1 -
Remote Node Profile.
Menu 11.1 - Remote Node Profile opens as shown in Figure 7-2.
Figure 7-2. Menu 11.1 - Remote Node Profile
3.
Edit the remote node settings with the desired changes.
4.
At the bottom of Menu 11.1, press Enter to save Menu 11.1.
Press [Esc] at any time to cancel your selections.
Menu 11.1 - Remote Node Profile
Rem Node Name= ? Edit PPP Options= No
Active= Yes Rem IP Addr= ?
Call Direction= Both Edit IP= No
Incoming: Telco Option:
Rem Login= ? Transfer Type= 64K
Rem Password= ? Allocated Budget(min)=
Rem CLID= Period(hr)=
Call Back= No Carrier Access Code=
Outgoing: Nailed-Up Connection= N/A
My Login= Toll Period(sec)= 0
My Password= ********
Authen= CHAP/PAP Session Options:
Pri Phone #= ? Edit Filter Sets= No
Sec Phone #= Idle Timeout(sec)= 300
Press ENTER to Confirm or ESC to Cancel: