Quick Reference Guide

Reference Guide for the Model RT338 ISDN Router
6-8 Using the Manager Interface to Configure Internet Access
3.
Type an unused remote node number at the prompt, and press Enter.
Menu 11.1 - Remote Node Profile opens as shown in Figure 6-4.
Figure 6-4. Menu 11.1 - Remote Node Profile
4.
At the Rem Node Name field, enter a name for the remote node.
The name can have up to 8 characters.
5.
Using the arrow keys, move the cursor to the Active field.
6.
Press the space bar to toggle the field to No.
7. Enter outgoing login name, password, and phone number(s).
8.
Set the Rem IP Addr to 1.1.1.1.
9.
Using the arrow keys, move the cursor to Edit IP.
10.
Press the space bar to toggle the field to Yes.
Menu 11.1 - Remote Node Profile
Rem Node Name= ? Edit PPP Options= No
Active= Yes Rem IP Addr= ?
Call Direction= Both Edit IP= No
Incoming: Telco Option:
Rem Login= ? Transfer Type= 64K
Rem Password= ? Allocated Budget(min)=
Rem CLID= Period(hr)=
Call Back= No Carrier Access Code=
Outgoing: Nailed-Up Connection= N/A
My Login= Toll Period(sec)= 0
My Password= ********
Authen= CHAP/PAP Session Options:
Pri Phone #= ? Edit Filter Sets= No
Sec Phone #= Idle Timeout(sec)= 300
Press ENTER to Confirm or ESC to Cancel:
Iw1Mgr.fm Page 8 Friday, October 6, 2000 5:26 PM