Quick Reference Guide

Reference Guide for the Model RT338 ISDN Router
Using FirstGear to Configure Internet Access 5-25
Selecting TCP/IP Detail on the Remote Node Tab
Click on the TCP/IP Detail button on the Remote Node tab to open the TCP/IP Detail tab shown in
Figure 5-12.
Figure 5-12. TCP/IP Detail Tab
Table 5-9 lists and describes the fields of the TCP/IP Detail tab.
Table 5-9. TCP/IP Detail Tab
Field Description
Remote IP Address This read-only field shows the IP address you entered for this remote node in the
previous menu.
Rem Subnet Mask This field displays the standard class netmask for the network address of the
remote router. If the remote network uses a netmask other than the standard
class netmask, you must enter the netmask here.
Iw1Gear.fm Page 25 Friday, October 6, 2000 5:23 PM