Quick Reference Guide

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
9-8 Troubleshooting
Starting XMODEM upload......
5.
From your terminal program, send the binary file
romfile0.311
using XMODEM transfer
protocol. Wait for the following message:
Programming successful....
6.
Restart the router.
Using FTP
To restore the configuration file over the LAN, you must have an FTP client program. Windows
includes an FTP client program that can be accessed using the Start button and Run menu. Other
FTP client programs are available through many software retailers and shareware sites.
To back up or restore the configuration:
1.
Rename
romfile0.311
to
rom-0
.
2.
Establish an FTP connection to the LAN IP address of the router.
No login name is necessary. The password is the current Manager password. If you have lost
the password, use the serial connection method described in the previous section. The factory
default password is 1234.
3.
Use your FTP program to get (back up) or put (restore) the file named
rom-0
in the
router.
Be sure to specify a binary (not ascii) transfer.