User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
82
M6100 Web Management User Guide
Click Update to update the page with the latest information on the switch.
Advanced Chassis Configuration
Advanced > Chassis Configuration uses the same screen as Basic > Chassis
Configuration described above.
Chassis Status
Use the Chassis Status page to display chassis protocol information:
1. Click System
Chassis > Advanced > Chassis Status.
2. Select either the Unit ID or All.
• Select the Unit ID field to display information for the selected unit.
• Select All to display information for all units.
Figure 13. Display Chassis Status
Serial Number The unique box serial number for this blade.
Uptime Displays the relative time since the last reboot of the blade.
Preconfigured Model Identifier Displays the model type assigned by the device manufacturer to
identify the device.
Plugged-in Model Identifier Displays the model type assigned by the device manufacturer to
identify the plugged-in device.
Detected Code Version Indicates the detected version of code on this blade.
Detected Code in Flash Displays the Release number and version number of the code
stored in flash.
SFS Last Attempt Status
Displays the Stack Firmware Synchronization last attempt status.
Field Description