User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Monitoring the System
512
M6100 Web Management User Guide
Persistent Logs
A persistent log is a log that is stored in persistent storage. Persistent storage survives
across platform reboots. The first log type is the system startup log. The system startup log
stores the first N messages received after system reboot. The second log type is the system
operation log. The system operation log stores the last N messages received during system
operation.
To access the Persistent Logs page, click Monitoring
Logs > Persistent Logs.
1. A log that is “Disabled” shall not log messages. A log that is “Enabled” shall log
messages. Enable or Disable logging by selecting the corresponding line on the
drop-down entry field.
2. Behavior.
A log records messages equal to or above a configured severity threshold. Select
the severity option by selecting the corresponding line on the drop-down entry field. These
severity levels have been enumerated below:
• Emergency (0) - system is unusable
• Alert (1) - action must be taken immediately
• Critical (2) - critical conditions
• Error (3) - error conditions
• W
arning (4) - warning conditions
Line The line number of the event.
Task Id The task ID of the event.
Code The event code.
Time
The time this event occurred.
Field Description