User Manual

Managing Device Security
446
M6100 Web Management User Guide
2. Use Secondary VLAN(s) to display all the statically created VLANs (excluding the primary
and default VLANs). This control is used to associate VLANs to the selected primary VLAN.
3. Click Delete to delete the IP subnet-based VLAN from the switch.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. If you make changes to the page, click Apply to apply the changes to the system.
Configuration changes take ef
fect immediately.
Field Description
Isolated VLAN Displays the isolated VLAN associated with the
selected primary VLAN.
Community VLAN(s) Displays the list of community VLAN(s) associated
with the selected primary VLAN.
Private VLAN Port Mode Configuration
To display the Private VLAN Port Mode Configuration page, click Security  Traffic Control>
Private VLAN > Private VLAN Port Mode Configuration.
1. Use Switch Port Mode to select the Switch Port Mode. The factory default is 'General'.
• General: Sets port in General Mode.
• Host: Sets port in Host Mode. Used for Private VLAN configuration.
• Promiscuous: Sets port in Promiscuous Mode. Used for Private VLAN configuration.
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.