User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Managing Device Security
437
M6100 Web Management User Guide
• Storm Control on page 448
MAC Filter
The MAC Filter link contains links to the following pages:
• MAC Filter on page 437
• MAC Filter Summary on page 438
MAC Filter
Use the MAC Filter Configuration page to create MAC filters that limit the traffic allowed into
and out of specified ports on the system.
To display the MAC Filter Configuration page, click Security Traffic Control> MAC Filter
MAC Filter Configuration.
To configure MAC filter settings:
1. Select Create Filter from the MAC Filter menu.
a. This is the list of MAC address and VLAN ID pairings for all configured filters.
To
change the port mask(s) for an existing filter, select the entry you want to change. To
add a new filter, select “Create Filter” from the top of the list.
b. From the VLAN ID menu, select the VLAN to use with the MAC address to fully
identify packets you want filtered.
You can change this field only when the Create
Filter option is selected from the MAC Filter menu.