User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Managing Device Security
422
M6100 Web Management User Guide
2. Use Baud Rate (bps) to select the default baud rate for the serial port connection from the
menu. You may choose from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200
baud. The factory default is 115200 baud.
3. Use Login Authentication
List to specify which authentication list to use when you login
through Telnet. The default value is defaultList.
4. Use Enable Authentication
List to specify which authentication list to use when going into
the privileged EXEC mode. The default value is enableList.
Field Description
Character Size (bits) The number of bits in a character. This is always 8.
Flow Control Whether hardware flow control is enabled or
disabled. It is always disabled.
Stop Bits The number of stop bits per character. Its is always
1.
Parity The parity method used on the serial port. It is
always None.
Denial of Service Configuration
To display the Denial of Service page, click Security Access > Denial of Service
Configuration.