User Manual

Configuring Quality of Service
377
M6100 Web Management User Guide
 Configure CoS Queue Drop Precedence settings
1. Use Interface to specify all CoS configurable interfaces.
2. Use Queue ID to specify all the available queues. V
alid values are 0 to 6. The default is 0.
3. Use Drop Precedence Level to specify all the available drop precedence levels. V
alid
values are 1 to 4. The default is 1.
4. Use WRED Minimum Threshold to specify the weighted RED minimum queue threshold
below which no packets are dropped for the current drop precedence level.
The range is 0
to 100. The default is 40.
5. Use WRED Maximum Threshold to specify the weighted RED maximum queue threshold
above which all packets are dropped for the current drop precedence level.
The range is 0
to 100. The default is 100.
6. Use WRED Drop Probability Scale to determine the packet drop probability for the current
drop precedence level.
The range is 0 to 100. The default is 10
7. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
8. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
CoS Interface Queue Drop Precedence Status
Table 155, CoS Interface Queue Drop Precedence Status describes the non-configurable data
that is displayed.