User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
345
M6100 Web Management User Guide
To configure the IGMP Proxy Interface
1. Use the Interface list to select the port for which data is to be configured.
You must
have configured at least one router interface before configuring or displaying data for an
IGMP Proxy interface, and it should not be an IGMP routing interface.
2. Select Enable or Disable from the
Admin Mode list to set the administrative status of IGMP
Proxy on the selected interface. The default is disable. Routing, IGMP and Multicast global
admin modes should be enabled to enable IGMP Proxy interface mode.
3. In the Unsolicited Report Interval field, enter the unsolicited time interval value in seconds.
The Unsolicited Report Interval is the time between repetitions of a host's initial report of
membership in a group. V
alid values are from 1 to 260. The default value is 1.
4. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Table 138, Multicast IGMP Proxy Interface Configuration describes the non-configurable
data that is displayed.
Table 138. Multicast IGMP Proxy Interface Configuration
Field Description
IP Address The IP address of the IGMP Proxy interface.
Subnet Mask The subnet mask for the IP address of the IGMP Proxy interface.
Operational Mode The operational state of IGMP Proxy interface.
Querier Address on Proxy Interface Specifies the Querier address on the proxy interface.
Number of Groups The current number of multicast group entries for the IGMP Proxy interface in
the cache table.
Version Enter the version of IGMP you want to configure on the selected interface.
V
alid values are 1 to 3; the default value is 3. This field is configurable only
when IGMP Proxy Interface mode is enabled.
Version 1 Querier Timeout The older IGMP version 1 Querier timeout value in seconds. The Older
V
ersion Querier Interval is the time-out for transitioning a host back to
IGMPv3 mode, once an older version query is heard. When an older version
query is received, hosts set their Older Version Querier Present Timer to
Older Version Querier Interval.
Version 2 Querier Timeout The older IGMP version 2 Querier timeout value in seconds.
Proxy Start Frequency The number of times the proxy was brought up.
IGMP Proxy Interface Statistics
To display the Multicast IGMP Proxy Interface Statistics page, click Routing Multicast
IGMP
Proxy Interface Statistics. The following page is displayed.