User Manual

Routing
336
M6100 Web Management User Guide
DVMRP Neighbor
To display the Multicast DVMRP Neighbor page, click Routing Multicast DVMRP 
DVMRP Neighbor. The following page is displayed.
 DVMRP Neighbor Search
1. Use the Search menu to search for neighbor entries by MAC Interface or Neighbor IP.
• Select Search > Interface from the list, enter the Interface in unit/slot/port format, for
example 1/0/13, then click Go. If the neighbor entry exists, the entry is displayed as
the first entry
, followed by the remaining entries.
• Select Search > Neighbor IP from the list, enter the neighbor IP
, then click Go. If the
entry with the matching Neighbor IP exists, that entry is displayed as the first entry,
followed by the remaining entries. An exact match is required.
• Click Update to update the page with the latest information on the switch.
Table 131, DVMRP Neighbor describes the non-configurable data that is displayed.
Table 131. DVMRP Neighbor
Received Bad Routes The number of invalid routes received on the selected interface.
Sent Routes The number of routes sent on the selected interface.
Field Description
Interface Select the interface for which data is to be displayed, or all the interface will
be displayed.
Neighbor IP The IP address of the neighbor whose information is displayed
State The state of the specified neighbor router on the selected interface, either
active or down.
Up Time The DVMRP uptime for the specified neighbor on the selected interface. This
is the time since the neighbor entry was learned.
Expiry Time The DVMRP expiry time for the specified neighbor on the selected interface.
This is the time left before this neighbor entry will age out, and is not
applicable if the neighbor router's state is down.
Generation ID The DVMRP generation ID for the specified neighbor on the selected
interface.
Field Description