User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
312
M6100 Web Management User Guide
OSPFv3 Link State Database
This screen displays the OSPFv3 Link State Database information.
To display the OSPF Link State Database page, click Routing > OSPFv3 > Advanced >
Link State Database. The following page is displayed.
OSPFv3 Link State Database
Table 118, Advanced OSPFv3 Link State Database on page 312 describes the
non-configurable data that is displayed.
Click Update to update the page with the latest information on the switch.
Table 118. Advanced OSPFv3 Link State Database
Field Description
Router ID The 32-bit integer in dotted decimal format that
uniquely identifies the router within the autonomous
system (AS).
The Router ID is set on the OSPFv3
Configuration page. If you want to change the Router
ID you must first disable OSPFv3. After you set the
new Router ID, you must re-enable OSPFv3 to have
the change take effect. The default value is 0.0.0.0,
although this is not a valid Router ID.
Area ID The ID of an OSPFv3 area to which one of the router
interfaces is connected.
An Area ID is a 32-bit
integer in dotted decimal format that uniquely
identifies the area to which an interface is connected.