User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring Switching Information
195
M6100 Web Management User Guide
1. Use Port Description to enter the description string to be attached to a port. It can be
up to 64 characters in length.
Field Description
Port Selects the interface for which data is to be displayed
or configured.
MAC Address Displays the physical address of the specified
interface.
PortList Bit Offset Displays the bit offset value which corresponds to the
port when the MIB object type PortList is used to
manage in SNMP
.
ifIndex Displays the interface index associated with the port.
Port Transceiver
This page displays the transceiver information for all fiber ports in the box.
To access the Port Transceiver page, click Switching
Ports Port Transceiver.
To navigate the page:
• Select Unit ID to display physical ports of the selected unit.
• Select All to display physical ports of all units.