User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Field Description
Configuration digest key Identifier used to identify the configuration currently
being used.
MST ID Table consisting of the MST instances (including the
CST) and the corresponding VLAN IDs associated
with each of them.
VID ID Table consisting of the VLAN IDs and the
corresponding FID associated with each of them.
FID ID Table consisting of the FIDs and the corresponding
VLAN IDs associated with each of them.
Configuring Switching Information
154
M6100 Web Management User Guide
Advanced
From the Advanced link, you can access the following pages:
• STP Configuration on page 154
• CST Configuration on page 156
• CST Port Configuration on page 159
• CST Port Status on page 160
• MST Configuration on page 162
• MST Port Status on page 164
• STP Statistics on page 165
STP Configuration
The Spanning Tree Configuration/Status page contains fields for enabling STP on the switch.
To display the Spanning Tree Configuration/Status page, click Switching > STP >
Advanced
STP Configuration.