User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring Switching Information
150
M6100 Web Management User Guide
iSCSI Sessions
To display the iSCSI Sessions page, click Switching > iSCSI > Basic > Sessions. The
following page is displayed.
The Table 71 describes the non-configurable iSCSI Sessions information.
Table 71. iSCSI Sessions
Field Description
Target Name Displays the target’s name.
Initiator Name Displays the initiator’s name.
Initiator Session ID (ISID) The iSCSI identifier.
Click Update to update the page with the latest information on the switch.
iSCSI Targets Configuration
Use the iSCSI Targets screen to configure iSCSI targets.
To configure iSCSI targets:
1. Click Switching > iSCSI >
Advanced > iSCSI Targets. The following page is
displayed.
2. Enter a TCP Port number on which an iSCSI target listens to requests. Up to 16 TCP ports
can be defined in the system. iSCSI well-known ports 860 and 3260 are configured as
defaults but you can remove them as any other configured target.