User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
126
M6100 Web Management User Guide
The following table describes the ISDP Statistics fields.
Table 68. ISDP Statistics
Field Description
ISDP Packets Received Displays the ISDP packets received including
ISDPv1 and ISDPv2 packets.
ISDP Packets Transmitted Displays the ISDP packets transmitted including
ISDPv1 and ISDPv2 packets.
ISDPv1 Packets Received Displays the ISDPv1 packets received.
ISDPv1 Packets Transmitted Displays the ISDPv1 packets transmitted.
ISDPv2 Packets Received Displays the ISDPv2 packets received.
ISDPv2 Packets Transmitted Displays the ISDPv2 packets transmitted.
ISDP Bad Header Displays the ISDP bad packets received.
ISDP Checksum Error Displays the number of the checksum error.
ISDP Transmission Failure Displays the number of the transmission failure.
ISDP Invalid Format Displays the number of the invalid format ISDP
packets received.
ISDP Table Full Displays the table size of the ISDP table.
ISDP Ip Address Table Full Displays the table size of the ISDP IP address table.
Timer Schedule
From Timer Schedule link under the System tab, you can configure the Timer Schedule
settings.
From the Timer Schedule link, you can access the following pages:
• Timer Global Configuration on page 126
• Timer Schedule Configuration on page 127
Timer Global Configuration
Use the Timer Global Configuration page to configure the Timer Global Configuration
settings.
To display the Timer Global Configuration page, click System > Services > Timer
Schedule> Basic > Global Configuration. A screen similar to the following is displayed.