Owner's Manual

Management

ReadyNAS Surveillance Add-on

Backup System Tool

Once you specify the ReadyNAS IP address, and enter the Surveillance user name and

password, you can use the Backup System Tool to create a backup job from your Windows

computer. The backup destination can be a hard disk or CD-ROM.

 To set up ReadyNAS access for the Backup System tool:

1. On the Windows Start menu, select

or select All Programs > ReadyNAS

Surveillance > Backup System.

2. Click the icon to set up the remote server (the location of the ReadyNAS system).

3. Enter the following information:

• In the Server Name field, enter the name of the ReadyNAS system.

• In the Address field, type the IP address of that ReadyNAS system (you can use the

RAIDar tool to find out what the IP address is).

• Modify the port number if necessary

• In the User Name field, type admin (the Surveillance user name).

• In the Password field, type the password that you use to access Surveillance.

The

default password is netgear1, but NETGEAR recommends that you change this to a

more secure password.

4. Select the Save Password check box.