Owner's Manual

Camera Setup

ReadyNAS Surveillance Add-on

Specify Lens Settings

You can specify whether each camera uses an ImmerVision lens and its position.

 To specify lens settings:

1. Select IP Camera > Camera Parameters > Lens Settings.

2. In the Camera List, click the camera that you want to modify.

3. Modify the information for the camera.

• Camera Name. Name of the camera.

• ImmerV

ision Lens. If an ImmerVision lens is installed, select the Enable radio

button.

• Camera Position. Select the position of the camera as wall, ceiling, or ground.

4. Click the Save button.

Note: If you enable the lens and it is not installed correctly or not installed

at all, a warning message displays if someone tries to operate the

lens on the Live View screen.