User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
DescriptionItem
Select the check box to enable the iTunes server. Clear the check box to disable the
iTunes server.
Enable iTunes Server
Enter a name that your ReadyNAS will use to advertise itself to your iTunes clients. By
default, the server name is set to My Music on %h where %h is the host name of your
ReadyNAS system.
Server Name
Enter a password to limit access to your ReadyNAS iTunes server.Password
5. Click the Apply button.
Your settings are saved.
Configure Discovery Services
Discovery services are protocols that allow network-enabled devices like computers or
your storage system to discover each other across networks. Your storage system
supports the Bonjour and UPnP discovery service protocols:
•
Bonjour. Enables discovery of various services on your ReadyNAS system and
provides a way to connect to the Admin Page for your ReadyNAS and AFP services.
OS X includes built-in Bonjour support. You can download Bonjour for Windows
from Apple’s website. Bonjour is not configurable on your ReadyNAS.
•
UPnP (Universal Plug-n-Play). Allows UPnP-enabled clients to discover your
ReadyNAS system on your LAN. You can enable or disable UPnP on your ReadyNAS.
To enable the UPnP:
Note: UPnP is used with ReadyCLOUD. If you use ReadyCLOUD, leave UPnP enabled.
1. Log in to your ReadyNAS.
2. Select System > Settings > Services.
Software Manual223System Settings
ReadyNAS OS 6.10