User Manual

Table Of Contents
In the sample configuration, the gateway address is 10.1.0.2.
7.
Select the adapter on the ReadyNAS used for the private network from the Adapter
menu.
The IP address and subnet mask for that adapter fills automatically.
8. Click the Add button.
The new static route shows in the list of routes.
Create a VLAN
You can create VLANs from any of the Ethernet interfaces on your ReadyNAS device.
To create a VLAN:
1. Log in to the ReadyNAS.
2. Select Network.
Ethernet interfaces with active links are colored green. Ethernet interfaces with
inactive links are colored gray.
3.
Click the gear icon for an Ethernet interface.
A pop-up window opens.
4. Click the Create VLAN button in the pop-up window.
Software Manual204System Settings
ReadyNAS OS 6.10