User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
When enabled, the antivirus software scans new files as they are written over the SMB
(CIFS) protocol. It does not scan existing files or files transferred over other protocols.
Additionally for all models except ReadyNAS 100 series models, scanning ReadyNAS
OS itself is available. By default, antivirus scanning is enabled.
Note: To configure advanced settings, install the antivirus app, Anti-Virus Plus. For
more information about installing apps, see Install and Manage Apps on page 237. With
Anti-Virus Plus you can schedule scans, including scans of existing files.
To enable or disable the free antivirus software:
1. Log in to your ReadyNAS.
2. Select System > Settings > Services.
The services panel displays.
3. Click the Antivirus button.
Note: The Protect ReadyNAS OS setting is not available on ReadyNAS 100 series
models.
4. Select the Enable real-time antivirus scanning check box to enable or disable
scanning.
Note: The Protect ReadyNAS OS setting is only available when the Enable real-time
antivirus scanning setting is set.
5. Click the Apply button.
The indicator on the Antivirus button turns green and the antivirus software is
enabled.
Software Manual189System Settings
ReadyNAS OS 6.10