User Manual

• To enable the protocol for the selected folder, set the On-Off slider so that the slider shows the On

position.

The indicator on the protocol button turns green.

When you enable a file-sharing protocol for an individual shared folder, the protocol

is also enabled globally. For more information about global settings, see Configure

Global Settings for File-Sharing Protocols on page 181.

Note

• To save the configured access settings but prevent them from taking effect, set the On-Off slider

so that the slider shows the Off position.

The indicator on the protocol button turns gray.

When you disable a file-sharing protocol for an individual shared folder, the protocol

remains enabled globally so that you can still access other folders that might be

using the protocol. For more information about global settings, see Configure

Global Settings for File-Sharing Protocols on page 181.

Note

10. Click the Apply button.

11. Click the OK button.

Your changes are saved and the pop-up window closes.

Configure User and Group Settings

For SMB, AFP, FTP, and HTTP, you can configure access rights to an individual shared folder for users

and groups. User and group settings do not apply to NFS and Rsync.

You cannot configure access rights for the ReadyNAS admin ( ) or for Cloud users

( ). For more information about Cloud users, see Use Cloud Services on page 136.

Note

To configure user and group network access settings:

1. Log in to your ReadyNAS.

2. Select Shares > Shares.

A list of shared folders and LUNs on each volume displays.

3. Select the shared folder that you want to configure.

Shared Folders

ReadyNAS OS 6.9.3