User Manual

Removing the RAID group removes storage from the volume, so the total volume
capacity goes down.
Note
Use the Volume Management Wizard to Create a Volume
Normally ReadyNAS OS automatically formats all of the disks in a ReadyNAS storage system (for all models
except an RR4360), in to a single X-RAID volume, but if you add disks or destroy existing volumes, you can
use the volume management wizard to create volumes.
As is not the case with other ReadyNAS storage systems, when you first configure an RR4360, the volume
management wizard starts automatically.
To create a volume with the volume management wizard:
1. Log in to the ReadyNAS.
2. Select System > Volumes.
3. Select the disks to include in the new volume.
4. Click the New Volume button.
5. Enter a name.
6. Leave the protection level as selected by ReadyNAS OS, or change it.
Volume Configuration
41
ReadyNAS OS 6.9.3