User Manual

Clicking the Export seed for this job box disables the job. After you transfer the
seed archive file, start the job by selecting Backup > ReadyDR, selecting the job,
clicking the gear icon, and selecting the Enable menu item. For information about
transfering job seed archive files, see Seed a ReadyDR Job on page 259.
Note
14. Click the Finish button.
The window closes and the new job is added to the Jobs list.
Monitor and Change ReadyDR Jobs
You can manually start a job, view the job history, export a seed file, delete the job, enable a stopped job,
and change the job settings.
To check the history or change job parameters:
1. Log in to your ReadyNAS.
2. Select Backup.
3. Select the ReadyDR job you want to monitor or change from the ReadyDR section.
4. Click the gear icon.
The options menu opens.
5. Click the desired action.
Immediately runs the job.Start
Displays the job history.History
Creates a file archive of the share or LUN and opens a file browse window
where you select the destination.The file name follows the format
ReadyDR_Seed-.jobnamehostname Use this file to seed a new ReadyDR job.
Export
Deletes the job.Delete
Enables a stopped job.Enable
Disables the job.Disable
Opens the settings window for the job. From this window you can change the
schedule, and the Bandwidth Limit, Compression, and Encrypted Transport
options.
Settings
Recovery Using ReadyDR Snapshots
When you need to recover shares and LUNs from a ReadyDR backup, you can recover them by cloning a
backed up snapshot.
One application of ReadyDR is to maintain a disaster recovery site. Depending on specifics of your disaster
recovery plan, you might want to restore the data to the original site, while in other cases you might want
to use the disaster recovery site's ReadyNAS device as a replacement for the original ReadyNAS device.
The process is different depending on the case.
Backup and Recovery
262
ReadyNAS OS 6.9.3