User Manual

5. Click the Install Firmware button.
6. Click the Browse button.
7. In the pop-up file browser, navigate to the file containing the updated firmware and select it.
The Update Firmware pop-up window displays the name of the selected file in the File Name field.
8. Click the Upload button.
The firmware file uploads to your ReadyNAS system. After a few moments, the Update Firmware window
displays details about the new firmware.
9. Click the Install button.
You are prompted to reboot your ReadyNAS system to complete the firmware installation.
10. Reboot your ReadyNAS system.
If you enabled email alerts, your ReadyNAS system sends a message when the firmware update finishes.
Reset the Firmware to Factory Defaults
WARNING:
Resetting the ReadyNAS to factory defaults deletes not only the configuration
but also all stored data. Back up the stored data if you intend to use it again.
To reset the ReadyNAS to factory defaults:
1. Log in to your ReadyNAS.
2. Select System > Settings > Update.
3. Click the Perform Factory Default button.
System Maintenance
227
ReadyNAS OS 6.9.3