User Manual

The range is flexible and depends on your selections from the menus above the graph. For example, the
range can be 0 to 60 bytes or from 0 to 40 KB.The upper part of the graph indicates the incoming (Rx)
traffic; the lower part of the graph indicates the outgoing (Tx) traffic.
From the menus above the graph, you can adjust the following settings:
• Network. Select all network interfaces, individual interfaces, or individual bonds.
• Protocol. Select all protocols or individual protocols (SMB, NFS, AFP, HTTP, HTTPS, SSH, iSCSI, or
SMTP).
• Period. Select the period over which the network usage is measured.You can select from 5 minutes
to 1 year.
• Update. Select how often the information in the table is updated.You can select from 1 to 30 minutes.
Utilization
The Volume utilization graph shows the percentage of used storage space for an individual volume or for
all volumes. The range is from 0 to 100 percent.
From the menus above the graph, you can adjust the following settings:
System Monitoring
218
ReadyNAS OS 6.9.3