User Manual

(Continued)
DescriptionItem
Enter the IP address of the SNMP UPS.AddressSNMP UPS only
Enter public or private, depending on the manufacturer’s
requirement or the UPS’s configuration.
Community
From the menu, select the MIB for one of the following
manufacturers:
• MGE UPS Systems
• American Power Conversion (APC)
• SOCOMEC
• Powerware
• Eaton Powerware (Monitored)
• Eaton Powerware (Managed)
• Raritan
• BayTech
• HP/Compac AF401A
• Cyberpower RMCARD201/RMCARD100/RMCARD202
MIB
Enter the IP address of the remote UPS.AddressRemote UPS only
For a remote UPS that is attached to a Linux server that is
running NUT, enter the user name used to access the remote
UPS. For a remote UPS that is attached to a ReadyNAS, enter
monuser. This user name is required for the ReadyNAS to
access the remote UPS. Do not enter another user name.
User
For a remote UPS that is attached to a Linux server that is
running NUT, enter the password used to access the remote
UPS. For a remote UPS that is attached to a ReadyNAS, enter
pass. This password is required for the ReadyNAS to access
the remote UPS. Do not enter another password.
Password
6. Click the Add button.
The UPS is added to the UPS section.
Monitor a UPS
To monitor the status of a UPS:
1. Log in to your ReadyNAS.
2. Select System > Power.
The window updates showing the power sections.
When the ReadyNAS system detects the UPS device, it displays the following information about the
device in the UPS list:
System Power
207
ReadyNAS OS 6.9.3