User Manual

Configure HTTP
To configure HTTP:
1. Log in to your ReadyNAS.
2. Select System > Settings > Services.
3. Click the HTTP button.
4. Configure the HTTP settings as explained in the following table:
DescriptionItem
HTTP is always enabled.Enable HTTP
Select the check box to enable HTTP access to the local admin page. If this check
box is cleared, attempts to access the local admin page using HTTP are automatically
connected using HTTPS.
Enable HTTP Admin
If you want to automatically redirect http://<ReadyNAS_IP_address> to a certain
shared folder, select that folder from the menu. This is useful if you do not want to
expose your default folder listing to outsiders.To redirect to a shared folder, create
an index file (such as index.htm or index.html) in your target shared folder
and enable the HTTP protocol for read-only access to that folder.
Only folders with HTTP enabled for the folder, display in the menu.
Redirect default web access
to this folder
5. Click the Apply button.
Your settings are saved.
System Settings
189
ReadyNAS OS 6.9.3