User Manual

3. Click the SMB protocol button.
The SMB Settings window opens.
4. Configure the settings as explained in the following table:
Table 12.
DescriptionItem
Select the check box to enable SMB. Clear the check
box to disable SMB.
Enable SMB
Select the check box to enable enhancements for use
with MacOS. Clear the check box if you are not
connecting to a MacOS system.
Enhance MacOS
Default value is VOLUME, but you can change the
workgroup name as needed.
Workgroup
• Configure per share. Select the Configure per
share radio button to enable SMB3 transport
encryption for individual shares.To use encryption,
encryption must be enabled on both the SMB client
and SMB server.
• Configure globally. Select the Configure globally
radio button to require a single SMB3 transport
encryption policy for all shares on all volumes. Use
the menu to set one of the following policies:
- Enabled
- Disabled
- Desired
- Required
To use encryption, encryption must be enabled on
both the SMB client and SMB server.
SMB3 Transport Encryption
5. Click the Apply button.
The SMB Settings window closes and the selected SMB configuration is set.
If you set configure per share, turn encryption on or off for the share from the advanced share settings
window (see Set Network Access Rights to Shared Folders on page 62).
Configure AFP, Rsync, or SSH
The only option for these protocols is to enable or disable the protocol globally.
System Settings
184
ReadyNAS OS 6.9.3