User Manual Orbi Whole Home AC1200 Mesh WiFi System Models: Orbi Router Model RBR10 Orbi Satellite Model RBS10 January 2021 202-12011-03 NETGEAR, Inc. 350 E.
Orbi Whole Home AC1200 Mesh WiFi System Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory and Legal Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/. (If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.
Contents Chapter 1 Overview Orbi router model RBR10 overview...................................................9 Orbi router hardware features........................................................9 Orbi router LED behavior.............................................................10 Orbi satellite model RBS10 overview...............................................10 Orbi satellite hardware features...................................................10 Orbi satellite LED behavior.........................
Orbi Whole Home AC1200 Mesh WiFi System Set up an IPv6 fixed Internet connection....................................34 Set up an IPv6 DHCP Internet connection..................................35 Set up an IPv6 PPPoE Internet connection..................................37 Change the MTU size.........................................................................38 Chapter 4 Control Access to the Internet Enable Circle smart parental controls..............................................
Orbi Whole Home AC1200 Mesh WiFi System Set up a static route.......................................................................72 Edit a static route...........................................................................73 Delete a static route.......................................................................74 Specify basic WiFi settings................................................................75 Change the WiFi password or security level...................................
Orbi Whole Home AC1200 Mesh WiFi System Use remote access...........................................................................103 Access your Orbi network from anywhere using the Orbi app...103 Chapter 8 Customize Internet Traffic Rules for Ports Manage port forwarding to a local server.....................................105 Set up port forwarding to a local server...................................105 Add a custom port forwarding service.....................................
Orbi Whole Home AC1200 Mesh WiFi System Chapter 11 Supplemental Information Factory Settings................................................................................135 Factory Settings for Orbi Router Model RBR10.......................135 Factory Settings for Orbi Satellite Model RBS10.....................136 Technical Specifications..................................................................138 Technical Specifications for Orbi Router Model RBR10.........
1 Overview The Orbi mesh WiFi System creates dedicated high-speed WiFi connections to your Internet service. The Orbi router (model RBR10) connects to your modem or gateway. The Orbi satellite (model RBS10) extends the WiFi signal throughout your home. This manual describes how to manage your Orbi Mesh WiFi System from your Orbi router web interface. You can manage your Orbi satellite from the Orbi router web interface.
Orbi Whole Home AC1200 Mesh WiFi System Orbi router model RBR10 overview The following sections are an overview of the Orbi router hardware features and LED behavior. Orbi router hardware features The following figures shows the Orbi router hardware features. Figure 1. Orbi router front and back views 1 2 3 4 5 6 1. Router LED 2. Ethernet port 3. Internet port 4. Power connector 5. Reset button 6.
Orbi Whole Home AC1200 Mesh WiFi System Orbi router LED behavior The following table describes the LED behavior for an Orbi router LED that is on the front of the router. Table 1. Orbi router LED behavior LED color Description Pulsing white The power adapter was connected to the router and the router is booting, the router is attempting to sync with the satellite, or the Reset button was pressed and the router is resetting to its factory default settings.
Orbi Whole Home AC1200 Mesh WiFi System 3. Reset button 4. Sync button Orbi satellite LED behavior The following table describes the LED behavior for an Orbi satellite LED that is on the front of the satellite. Table 2.
Orbi Whole Home AC1200 Mesh WiFi System To cable your router: 1. Unplug your modem’s power, leaving the modem connected to the wall jack for your Internet service. If your modem uses a battery backup, remove the battery. 2. Plug in and turn on your modem. If your modem uses a battery backup, put the battery back in. 3. Connect your modem to the Internet port of your router with the Ethernet cable that came with your router. 4.
Orbi Whole Home AC1200 Mesh WiFi System The satellite LED lights one of the following colors: • Blue. The Orbi router and satellite successfully synced, and the connection between the router and satellite is good. • Amber. The Orbi router and satellite failed to sync, or the connection with the router is poor. Move the Orbi satellite closer to the Orbi router and try again. 3. If the satellite LED is amber, do the following: a.
2 Connect to the Network and Access the Router This chapter contains the following sections: • • • • • • Connect to the network Types of logins Router and satellite labels Set up and manage with the NETGEAR Orbi app Use a web browser to access the router Change the language 14
Orbi Whole Home AC1200 Mesh WiFi System Connect to the network You can connect to the Orbi network through a wired or WiFi connection. If you set up your computer to use a static IP address, change the settings so that it uses Dynamic Host Configuration Protocol (DHCP). Wired connection You can connect your computer to the router using an Ethernet cable and join the router’s local area network (LAN). To connect your computer to the router with an Ethernet cable: 1.
Orbi Whole Home AC1200 Mesh WiFi System To use WPS to connect to the WiFi network: 1. Make sure that the router is receiving power (its router LED is lit). 2. Check the WPS instructions for your computer or WiFi device. 3. Press the Sync button on the router. 4. Within two minutes, on your WPS-enabled device, press its WPS button or follow its instructions for WPS connections. Your computer or mobile device connects to the WiFi network. Types of logins Separate types of logins serve different purposes.
Orbi Whole Home AC1200 Mesh WiFi System Set up and manage with the NETGEAR Orbi app You can use the NETGEAR Orbi app to set up and access your Orbi network. To find the app, scan a QR code or search for NETGEAR Orbi in the Apple App Store or Google Play Store. For more information about the Orbi app, visit https://www.netgear.com/home/apps-services/orbi-app. Note: If you do not want to use the NETGEAR Orbi app, you can use the Orbi router web interface to set up your Orbi devices.
Orbi Whole Home AC1200 Mesh WiFi System Use a web browser to access the router When you connect to the network (either with WiFi or with an Ethernet cable), you can use a web browser to access the router to view or change its settings. The first time you access the router, the NETGEAR installation assistant automatically checks to see if your router can connect to your Internet service. Use the automatic Internet setup option You can set up your Orbi router automatically with the router web interface.
Orbi Whole Home AC1200 Mesh WiFi System The page that displays depends on whether you accessed the router before: • The first time that you set up the Internet connection for your router, the browser goes to orbilogin.com, and the Orbi login page displays. • If the router web interface does not display, enter orbilogin.com in the address field for your browser to start the installation process. 3. Follow the onscreen instructions. The router connects to the Internet. 4.
Orbi Whole Home AC1200 Mesh WiFi System The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. Change the language By default, the language is set as Auto. To change the language: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the router admin user name and password.
3 Specify Your Internet Settings Usually, the quickest way to set up the router to use your Internet connection is to allow Orbi to detect the Internet connection when you first access the router with a web browser. You can also customize or specify your Internet settings.
Orbi Whole Home AC1200 Mesh WiFi System Use the Setup Wizard You can use the Setup Wizard to detect your Internet settings and automatically set up your router. To use the Setup Wizard: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in.
Orbi Whole Home AC1200 Mesh WiFi System 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Internet. The Internet Setup page. 5. Leave the Does your Internet connection require a login No radio button selected. 6. If your Internet connection requires an account name or host name, type it in the Account Name (If Required) field.
Orbi Whole Home AC1200 Mesh WiFi System 12. Click the Test button to test your Internet connection. Specify an Internet connection that uses a login To view or change the basic Internet setup: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in.
Orbi Whole Home AC1200 Mesh WiFi System 12. Select an Internet IP Address radio button: • Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses. • Use Static IP Address. Enter the IP address, IP subnet mask, and gateway IP address that your ISP assigned. The gateway is the ISP router to which your router connects. 13. Select a Domain Name Server (DNS) radio button: • Get Automatically from ISP.
Orbi Whole Home AC1200 Mesh WiFi System Specify IPv6 Internet connections You can set up an IPv6 Internet connection if the router does not detect it automatically. To set up an IPv6 Internet connection: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in.
Orbi Whole Home AC1200 Mesh WiFi System Use auto detection for an IPv6 Internet connection To set up an IPv6 Internet connection through auto detection: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Orbi Whole Home AC1200 Mesh WiFi System If you do not specify an ID here, the router generates one automatically from its MAC address. 8. Select an IPv6 Filtering radio button: • Secured. In secured mode, which is the default mode, the router inspects both TCP and UDP packets. • Open. In open mode, the router inspects UDP packets only. 9. Click the Apply button. Your settings are saved.
Orbi Whole Home AC1200 Mesh WiFi System 6. (Optional) In the DHCP User Class (If Required) field, enter a host name. Most people can leave this field blank, but if your ISP gave you a specific host name, enter it here. 7. (Optional) In the DHCP Domain Name (If Required) field, enter a domain name. You can type the domain name of your IPv6 ISP. Do not enter the domain name for the IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz as the domain name.
Orbi Whole Home AC1200 Mesh WiFi System operational domain of 6rd to the service provider’s network and is under direct control of the service provider. The IPv6 service provided is equivalent to native IPv6. The 6rd mechanism relies on an algorithmic mapping between the IPv6 and IPv4 addresses that are assigned for use within the service provider’s network. This mapping allows for automatic determination of IPv4 tunnel endpoints from IPv6 prefixes, allowing stateless operation of 6rd.
Orbi Whole Home AC1200 Mesh WiFi System 6. Select an IPv6 Domain Name Server (DNS) Address radio button: • Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. • Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IP address of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it also. 7.
Orbi Whole Home AC1200 Mesh WiFi System 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > IPv6. The IPv6 page displays. 5. From the Internet Connection Type menu, select 6to4 Tunnel. The page adjusts. The router automatically detects the information in the Router’s IPv6 Address on LAN field.
Orbi Whole Home AC1200 Mesh WiFi System If you do not specify an ID here, the router generates one automatically from its MAC address. 10. Select an IPv6 Filtering radio button: • Secured. In secured mode, which is the default mode, the router inspects both TCP and UDP packets. • Open. In open mode, the router inspects UDP packets only. 11. Click the Apply button. Your settings are saved.
Orbi Whole Home AC1200 Mesh WiFi System Set up an IPv6 fixed Internet connection To set up a fixed IPv6 Internet connection: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Orbi Whole Home AC1200 Mesh WiFi System 8. In the IPv6 Address/Prefix Length fields, specify the static IPv6 address and prefix length of the router’s LAN interface. If you do not specify an ID here, the router generates one automatically from its MAC address. 9. Select an IPv6 Filtering radio button: • Secured. In secured mode, which is the default mode, the router inspects both TCP and UDP packets. • Open. In open mode, the router inspects UDP packets only. 10. Click the Apply button.
Orbi Whole Home AC1200 Mesh WiFi System prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 6. Select an IPv6 Domain Name Server (DNS) Address radio button: • Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. • Use These DNS Servers. If you know that your ISP requires specific servers, select this option.
Orbi Whole Home AC1200 Mesh WiFi System Set up an IPv6 PPPoE Internet connection To set up a PPPoE IPv6 Internet connection: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Orbi Whole Home AC1200 Mesh WiFi System Note: The default setting of the Connection Mode field is Always On to provide a steady IPv6 connection. The router never terminates the connection. If the connection is terminated, for example, when the modem is turned off, the router attempts to reestablish the connection immediately after the PPPoE connection becomes available again. 9. Select an IPv6 Domain Name Server (DNS) Address radio button: • Get Automatically from ISP.
Orbi Whole Home AC1200 Mesh WiFi System uses a lower MTU setting than the other devices, the data packets must be split or “fragmented” to accommodate the device with the smallest MTU. The best MTU setting for NETGEAR equipment is often the default value. In some situations, changing the value fixes one problem but causes another.
Orbi Whole Home AC1200 Mesh WiFi System Table 3. Common MTU sizes MTU Application 1500 The largest Ethernet packet size. This setting is typical for connections that do not use PPPoE or VPN, and is the default value for NETGEAR routers, adapters, and switches. 1492 Used in PPPoE environments. 1472 Maximum size to use for pinging. (Larger packets are fragmented.) 1468 Used in some DHCP environments. 1436 Used in PPTP environments or with VPN. 576 Typical value to connect to dial-up ISPs.
4 Control Access to the Internet The router comes with a built-in firewall that helps protect your home network from unwanted intrusions from the Internet.
Orbi Whole Home AC1200 Mesh WiFi System Enable Circle smart parental controls Circle smart parental controls is a parental control technology that helps you monitor your children’s devices that are connected to your network. You can enable Circle using your router web interface, or you can enable Circle using the Orbi app. After you enable Circle using the router web interface or the Orbi app, you must use the Circle app to finish the setup.
Orbi Whole Home AC1200 Mesh WiFi System For more information, see Set up router mode on page 80. 5. Update your router's firmware. For more information, see Update the router and satellite firmware on page 86. 6. Select BASIC > Parental Controls. The Parental Controls page displays. 7. Move the slider to the right to enable Circle. Note: You can only enable one parental controls service. 8. Click the Apply button. The links to download the Circle app displays. 9.
Orbi Whole Home AC1200 Mesh WiFi System Activate and manage NETGEAR Armor using the Orbi app NETGEAR Armor is an advanced multi-layer cyber security solution that protects not only your network but individual devices as well. NETGEAR Armor protects your devices from viruses, spyware, hackers, spam, and phishing. For more information about NETGEAR Armor, visit netgear.com/landings/armor/default.aspx. Use the NETGEAR Orbi app to activate and manage NETGEAR Armor. To activate Armor using the Orbi app: 1.
Orbi Whole Home AC1200 Mesh WiFi System You must select this check box before you can specify an access rule and use the Allow and Block buttons. When this check box is cleared, all devices are allowed to connect, even if a device is in the blocked list. 6. Select an access rule: • Allow all new devices to connect. With this setting, if you buy a new device, it can access your network. You don’t need to enter its MAC address on this page. We recommend that you leave this radio button selected.
Orbi Whole Home AC1200 Mesh WiFi System To block Internet sites: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Security > Block Sites. The Block Sites page displays. 5.
Orbi Whole Home AC1200 Mesh WiFi System Delete keywords that are used to block Internet sites To delete keywords that are used to block Internet sites: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Orbi Whole Home AC1200 Mesh WiFi System 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Security > Block Sites. The Block Sites page displays. 5. Scroll down and select the Allow trusted IP address to visit blocked sites check box. 6. In the Trusted IP Address field, enter the IP address of the trusted computer. 7.
Orbi Whole Home AC1200 Mesh WiFi System 6. Click the Add button. The Block Services Setup page displays. 7. To add a service that is in the Service Type list, select the application or service. The settings for this service automatically display in the fields. 8. To add a service or application that is not the list, select User Defined. a. If you know that the application uses either TCP or UDP, select the appropriate protocol. Otherwise, select TCP/UDP (both). b.
Orbi Whole Home AC1200 Mesh WiFi System The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Security > Access Control. The Access Control page displays. 5. Select the Turn on Access Control check box. 6. Click the View list of allowed devices not currently connected to the network link. The list displays. 7. Select the check box for a device. 8.
Orbi Whole Home AC1200 Mesh WiFi System 5. Specify when to block keywords and services: • Days to Block. Select the check box for each day that you want to block the keywords or select the Every Day check box, which automatically selects the check boxes for all days. • Time of Day to Block. Select a start and end time in 24-hour format, or select All Day for 24-hour blocking. 6. Select your time zone from the list. 7.
Orbi Whole Home AC1200 Mesh WiFi System 7. In the Your Outgoing Mail Server field, enter the name of your ISP outgoing (SMTP) mail server (such as mail.myISP.com). You might be able to find this information in the configuration window of your email program. If you leave this field blank, log and alert messages are not sent. 8. In the Outgoing Mail Server Port Number field, enter your mail server’s port number. You might be able to find this information in the configuration window of your email program. 9.
5 Optimize Performance This chapter contains the following sections: • • • • • • Enable or disable WiFi Multimedia Quality of Service Improve network connections with Universal Plug and Play Enable or disable daisy-chain topology Enable or disable implicit beamforming Enable or disable MU-MIMO Enable or disable fast roaming 53
Orbi Whole Home AC1200 Mesh WiFi System Enable or disable WiFi Multimedia Quality of Service Wi-Fi Multimedia Quality of Service (WMM QoS) prioritizes WiFi voice and video traffic over the WiFi link. WMM QoS is automatically enabled. WMM QoS prioritizes WiFi data packets from different applications based on four access categories: voice, video, best effort, and background. For an application to receive the benefits of WMM QoS, WMM must be enabled for both it and the client running that application.
Orbi Whole Home AC1200 Mesh WiFi System Improve network connections with Universal Plug and Play Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network.
Orbi Whole Home AC1200 Mesh WiFi System are not being updated or reached correctly, it might be necessary to increase this value. 8. Click the Apply button. The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the router and which ports (internal and external) that device opened. The UPnP Portmap Table also displays what type of port is open and whether that port is still active for each IP address. 9.
Orbi Whole Home AC1200 Mesh WiFi System Your settings are saved. Enable or disable implicit beamforming Implicit beamforming allows the router to use information from WiFi clients that support beamforming to improve the WiFi signal. To enable or disable implicit beamforming: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin.
Orbi Whole Home AC1200 Mesh WiFi System To enable or disable MU-MIMO: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Wireless Settings.
Orbi Whole Home AC1200 Mesh WiFi System 4. Select ADVANCED > Advanced Setup > Wireless Settings. The Advanced Wireless Settings page displays. 5. To enable or disable fast roaming, do one of the following: • To enable fast roaming, select the Enable Fast Roaming check box. • To disable fast roaming, clear the Enable Fast Roaming check box. 6. Click the Apply button. Your settings are saved.
6 Specify Network Settings This chapter includes the following sections: • • • • • • • • • • • • • • • • • • View or change WAN settings Manage Dynamic DNS Set up a default DMZ server Change the router’s device name Change the LAN TCP/IP settings Use the router as a DHCP server Disable the DHCP server feature in the router Manage reserved LAN IP addresses Manage custom static routes Specify basic WiFi settings Change the WiFi password or security level Set up a guest WiFi network View or change advanced Wi
Orbi Whole Home AC1200 Mesh WiFi System View or change WAN settings You can view or configure wide area network (WAN) settings for the Internet port. You can set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the router to respond to a ping to its WAN (Internet) port. To view the WAN settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Orbi Whole Home AC1200 Mesh WiFi System applications, or multimedia applications from working. Open NAT provides a much less secured firewall, but allows almost all Internet applications to work. • Disable SIP ALG. The application-level gateway (ALG) for the Session Initiation Protocol (SIP) is enabled by default for enhanced address and port translation. However, some types of VoIP and video traffic might not work well when the SIP ALG is enabled.
Orbi Whole Home AC1200 Mesh WiFi System 4. Select ADVANCED > Advanced Setup > Dynamic DNS. The Dynamic DNS page displays. 5. Select the Use a Dynamic DNS Service check box. 6. In the Service Provider list, select NETGEAR. 7. Select the No radio button. 8. In the Host Name field, type the name that you want to use for your URL. The host name is sometimes called the domain name. Your free URL includes the host name that you specify, and ends with mynetgear.com. For example, specify MyName.mynetgear.com. 9.
Orbi Whole Home AC1200 Mesh WiFi System 5. Select the Use a Dynamic DNS Service check box. 6. In the Service Provider list, select your provider. 7. Select the Yes radio button. The page adjusts and displays to show the Status, Cancel, and Apply buttons. 8. In the Host Name field, type the host name (sometimes called the domain name) for your account. 9. For a No-IP account or Dyn account, in the User Name field, enter the user name for your account. 10.
Orbi Whole Home AC1200 Mesh WiFi System Set up a default DMZ server The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address Translation (NAT). The router is programmed to recognize some of these applications and to work correctly with them, but other applications might not function well.
Orbi Whole Home AC1200 Mesh WiFi System Change the router’s device name The router’s device name is its model number. This device name displays in a file manager when you browse your network. To change the router’s device name: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin.
Orbi Whole Home AC1200 Mesh WiFi System To change the LAN TCP/IP settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Setup > LAN Setup. The LAN Setup page displays. 5.
Orbi Whole Home AC1200 Mesh WiFi System Your settings are saved. If you changed the LAN IP address of the router, you are disconnected when this change takes effect. 9. To reconnect, close your browser, relaunch it, and log in to the router. Use the router as a DHCP server By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The router assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN.
Orbi Whole Home AC1200 Mesh WiFi System This IP address must be in the same subnet as the router. The default ending IP address is 192.168.1.254. 7. Click the Apply button. Your settings are saved.
Orbi Whole Home AC1200 Mesh WiFi System Manage reserved LAN IP addresses When you specify a reserved IP address for a computer on the LAN, that computer always receives the same IP address each time it accesses the router’s DHCP server. Assign reserved IP addresses to computers or servers that require permanent IP settings. Reserve an IP address To reserve an IP address: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com.
Orbi Whole Home AC1200 Mesh WiFi System Edit a reserved IP address To edit a reserved address entry: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Setup > LAN Setup.
Orbi Whole Home AC1200 Mesh WiFi System 5. Select the radio button next to the reserved address. 6. Click the Delete button. The address is removed. Manage custom static routes Typically, you do not need to add static routes unless you use multiple routers or multiple IP subnets on your network. As an example of when a static route is needed, consider the following case: • Your main Internet access is through a cable modem to an ISP.
Orbi Whole Home AC1200 Mesh WiFi System 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes page displays. 5. Click the Add button. The page adjusts. 6. In the Route Name field, type a name for this static route (for identification purposes only.) 7.
Orbi Whole Home AC1200 Mesh WiFi System The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes page displays. 5. In the table, select the radio button for the route. 6. Click the Edit button. The Static Routes page adjusts. 7. Edit the route information. 8. Click the Apply button. Your settings are saved.
Orbi Whole Home AC1200 Mesh WiFi System Specify basic WiFi settings The router and satellite come preset with the same WiFi network name (SSID) and the same WiFi security. You can find the SSID and password on the router label and on the satellite label. If you log in to the router and change the WiFi settings, the router automatically sends the new settings to the satellite. If you change your WiFi settings, make a note of the new settings and store it in a safe place where you can easily find it.
Orbi Whole Home AC1200 Mesh WiFi System When you use multiple access points, it is better if adjacent access points use different channels to reduce interference. The recommended channel spacing between adjacent access points is four channels (for example, use Channels 1 and 5, or 6 and 10). 7. Click the Apply button. Your settings are saved. The router sends the new settings to the satellite. If you are using a WiFi connection and you changed the SSID, you are disconnected from the network. 8.
Orbi Whole Home AC1200 Mesh WiFi System The Wireless Settings page displays. 5. Under Security Options, select a WPA option: • WPA2-PSK [AES] • WPA-PSK [TKIP] + WPA2-PSK [AES] Some older computers and WiFi devices cannot use WPA2. If your network includes old computers and WiFi devices, select the WPA-PSK [TKIP] + WPA2-PSK [AES] radio button. The Password (Network Key) field displays. 6. In the Password (Network Key) field, enter the network key (password) that you want to use.
Orbi Whole Home AC1200 Mesh WiFi System Allowing the router to broadcast its WiFi network name (SSID) makes it easier to find your network and connect to it. If you clear this check box, that creates a hidden network. 7. To change the network name, type a new name in the Guest Wireless Network Name (SSID) field. The name can be up to 32 characters long and it is case-sensitive. If you change the name, make sure to write down the new name and keep it in a safe place. 8.
Orbi Whole Home AC1200 Mesh WiFi System 5. In the Region list, select your region. In some locations, you cannot change this setting. 6. To control the SSID broadcast, select or clear the Enable SSID Broadcast check box. When this check box is selected, the router broadcasts its network name (SSID) so that it displays when you scan for local WiFi networks on your computer or WiFi device. 7. Click the Apply button. Your settings are saved.
Orbi Whole Home AC1200 Mesh WiFi System 7. Select the IP address setting: • Get dynamically from existing router. The other router on the network assigns an IP address to this router while this router is in AP mode. • Enable fixed IP settings on this device (not recommended). Use this setting if you want to manually assign a specific IP address to this router while it is in AP mode. Using this option effectively requires advanced network experience.
Orbi Whole Home AC1200 Mesh WiFi System Generate a new backhaul password The backhaul password is a security key that is used in WiFi communication between the router and the satellite. You can generate a new backhaul password. After you generate a new backhaul password, you must use the Sync button to build a new backhaul connection so that the router and satellite can communicate with each other using WiFi. To generate a new backhaul password: 1.
Orbi Whole Home AC1200 Mesh WiFi System Set up a bridge for a port group If the device that is connected to the router’s Ethernet port is an IPTV device, your ISP might require you to set up a bridge for a port group for the router’s Internet interface. A bridge with a port group prevents packets that are sent between the IPTV device and the router’s Internet port from being processed through the router’s Network Address Translation (NAT) service. To configure a port group and enable the bridge: 1.
Orbi Whole Home AC1200 Mesh WiFi System If you are subscribed to IPTV service, the router might require VLAN tags to distinguish between the Internet traffic and the IPTV traffic. A bridge with a VLAN tag group prevents packets that are sent between the IPTV device and the router’s Internet port from being processed through the router’s Network Address Translation (NAT) service. You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to each VLAN tag group.
Orbi Whole Home AC1200 Mesh WiFi System (Continued) Field Description Priority Enter a value from 0 to 7. Select the Port1 check box. 9. Click the Apply button. The VLAN tag group is added. 10. Click the Apply button. Your settings are saved. Enable British Telecom IGMP proxy support You must use this feature only for British Telecom (BT) Internet Protocol television (IPTV) service. It might also work with TalkTalk IPTV service. To enable BT IGMP proxy support: 1.
7 Manage Your Network This chapter describes the router settings for administering and maintaining your router and home network.
Orbi Whole Home AC1200 Mesh WiFi System Update the router and satellite firmware You can use the router web interface to check if new firmware is available and update your router and satellite, or you can manually update the firmware for your router and satellite. Check for firmware updates To check for new firmware and update your router and satellite: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Orbi Whole Home AC1200 Mesh WiFi System Manually update firmware If a satellite is connected to your router, you can log in to the router to manually upload the firmware on your satellite. WARNING: We recommend that you always update the firmware on your satellite first, and then update your router. Also, do not update the firmware on your router and satellite at the same time, and do not update more than one Orbi device (router or satellite) at a time.
Orbi Whole Home AC1200 Mesh WiFi System The Orbi satellite Firmware Update window opens. 7. If the browser asks you for the admin password, enter the same password that you entered for the router. 8. Click the BROWSE button. 9. Locate and select the satellite firmware file that you downloaded. The firmware file name ends in .img or .chk. 10. Click the UPLOAD button. It takes a few minutes to complete the process. 11.
Orbi Whole Home AC1200 Mesh WiFi System Change the admin password This feature let you change the default password that is used to log in to the router with the user name admin. This password is not the one that you use to access the Orbi WiFi network. Note: Be sure to change the password for the user name admin to a secure password. The ideal password contains no dictionary words from any language and contains uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
Orbi Whole Home AC1200 Mesh WiFi System To enable password reset: 1. Launch a web browser from a computer or WiFi device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the admin user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Administration > Set Password. The Set Password page displays. 5.
Orbi Whole Home AC1200 Mesh WiFi System 7. Click the CONTINUE button. You are requested to set a new admin password and set new security questions. 8. Enter your new admin password, set new security questions and answers, and click the NEXT button. Your settings are saved. 9. Click the LOGIN AGAIN button. A login window opens. 10. With your new admin password, log in to the router. View router status and usage information To view router status and usage information: 1.
Orbi Whole Home AC1200 Mesh WiFi System The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Click the ADVANCED tab. 5. In the Internet Port pane, click the Show Statistics button. The Show Statistics window opens and displays following information: • System Up Time. The time elapsed since the router was last restarted. • Port.
Orbi Whole Home AC1200 Mesh WiFi System 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Click the ADVANCED tab. 5. In the Internet Port pane, click the Connection Status button. The Connection Status window opens and displays the following information • IP Address. The IP address that is assigned to the router. • Subnet Mask.
Orbi Whole Home AC1200 Mesh WiFi System The BASIC Home page displays. 4. Select Attached Devices. The Attached Devices page displays. 5. In the Connected Satellites section, find your satellite’s IP address. 6. Enter your satellite’s IP address in your web browser’s address bar. A login window opens. 7. Enter the same admin user name and password that you entered for the router. The satellite’s status displays.
Orbi Whole Home AC1200 Mesh WiFi System 6. To clear the log entries, click the Clear Log button. 7. To email the log immediately, click the Send Log button. View devices connected to the network or edit device information You can view the devices that are connected to your Orbi network. You can also edit the information that displays on the Attached Devices page in the router web interface.
Orbi Whole Home AC1200 Mesh WiFi System 5. To update this page, click the Refresh button. Edit device information on the Attached Devices page You can change the connected device model and name that display on the Attached Devices page. To view devices connected to your network: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the router admin user name and password. The user name is admin.
Orbi Whole Home AC1200 Mesh WiFi System To view satellites connected to your network: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Attached Devices.
Orbi Whole Home AC1200 Mesh WiFi System A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Attached Devices. The Attached Devices page displays. 5. Select a connected device that displays on the page. The Edit Device page displays. 6.
Orbi Whole Home AC1200 Mesh WiFi System 6. To control the volume of Internet traffic, use either the traffic volume control feature or the connection time control feature: • • Select the Traffic volume control by radio button and then select one of the following options: - No Limit. No restriction is applied when the traffic limit is reached. - Download only. The restriction is applied to incoming traffic only. - Both Directions. The restriction is applied to both incoming and outgoing traffic.
Orbi Whole Home AC1200 Mesh WiFi System Back up settings To back up the router’s configuration settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Orbi Whole Home AC1200 Mesh WiFi System The factory default settings are restored. The user name is admin, the password is password, and the LAN IP address is 192.168.1.1. DHCP is enabled. Restore configuration settings To restore configuration settings that you backed up: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin.
Orbi Whole Home AC1200 Mesh WiFi System To set up remote management: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Remote Management.
Orbi Whole Home AC1200 Mesh WiFi System Use remote access To use remote access: 1. Launch a web browser on a computer that is not on your home network. 2. Type your router’s WAN IP address into your browser’s address or location field followed by a colon (:) and the default port number (8443) or custom port number. For example, if your external address is 134.177.0.123 and you use port number 8443, enter https://134.177.0.123:8443 in your browser.
8 Customize Internet Traffic Rules for Ports You can use port forwarding and port triggering to set up rules for Internet traffic. You need networking knowledge to set up these features.
Orbi Whole Home AC1200 Mesh WiFi System Manage port forwarding to a local server If your home network includes a server, you can allow certain types of incoming traffic to reach the server. For example, you might want to make a local web server, FTP server, or game server visible and available to the Internet. The router can forward incoming traffic with specific protocols to computers on your local network.
Orbi Whole Home AC1200 Mesh WiFi System The service displays in the list. Add a custom port forwarding service To add a custom service: 1. Find out which port number or range of numbers the application uses. You can usually find this information by contacting the publisher of the application or user groups or news groups. 2. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 3. Enter orbilogin.com. A login window opens. 4. Enter the admin user name and password.
Orbi Whole Home AC1200 Mesh WiFi System Edit a port forwarding service To edit a port forwarding entry: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Orbi Whole Home AC1200 Mesh WiFi System Delete a port forwarding entry To delete a port forwarding entry: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Orbi Whole Home AC1200 Mesh WiFi System How the router implements the port forwarding rule The following sequence shows the effects of a port forwarding rule: 1. When you type the URL www.example.com in your browser, the browser sends a web page request message with the following destination information: • Destination address. The IP address of www.example.com, which is the address of your router. • Destination port number. 80, which is the standard port number for a web server process. 2.
Orbi Whole Home AC1200 Mesh WiFi System Add a port triggering service To add a port triggering service: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Orbi Whole Home AC1200 Mesh WiFi System 13. Click the Apply button. The service is now in the Portmap Table. Disable port triggering or change the time-out period By default, port triggering is enabled and a default time-out period is defined. You can disable port triggering or change the time-out period. To disable port triggering or change the time-out period: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Orbi Whole Home AC1200 Mesh WiFi System An example is Internet Relay Chat (IRC). Your computer connects to an IRC server at destination port 6667. The IRC server not only responds to your originating source port, but also sends an “identify” message to your computer on port 113. Using port triggering, you can tell the router, “When you initiate a session with destination port 6667, you must also allow incoming traffic on port 113 to reach the originating computer.
9 Use VPN to Access Your Network You can use OpenVPN software to remotely access your router using virtual private networking (VPN). This chapter explains how to set up and use VPN access.
Orbi Whole Home AC1200 Mesh WiFi System Set up a VPN connection A virtual private network (VPN) lets you use the Internet to securely access your network when you aren’t home. This type of VPN access is called a client-to-gateway tunnel. The computer is the client, and the router is the gateway. To use the VPN feature, you must log in to the router and enable VPN, and you must install and run VPN client software on the computer. VPN uses DDNS or a static IP address to connect with your router.
Orbi Whole Home AC1200 Mesh WiFi System 6. To change the TUN mode service type, select the UCP or TCP radio button. 7. To change the TUN mode service port, type the port number that you want to use in the field. The default port number is 12973. 8. To change the TAP mode service type, select the UCP or TCP radio button. 9. To change the TAP mode service port, type the port number that you want to use in the field. The default port number is 12974. 10. Click the Apply button. Your settings are saved.
Orbi Whole Home AC1200 Mesh WiFi System 5. Make sure that the Enable VPN Service check box is selected. 6. Specify any VPN service settings on the page. For more information, see Specify VPN service in the router on page 114. 7. Click the FOR WINDOWS button to download the OpenVPN configuration files. 8. Visit openvpn.net/community-downloads/ to download the OpenVPN client utility. 9. In the Windows Installer section of the page, double-click the openVPN-install-xxx.exe link. 10.
Orbi Whole Home AC1200 Mesh WiFi System 14. To specify the destination folder, click the Browse button and select a destination folder. 15. Click the Install button. The window displays the progress of the installation and then displays the final installation page. 16. Click the Finish button. 17. Unzip the configuration files that you downloaded and copy them to the folder where the VPN client is installed on your device. For a client device with Windows 64-bit system, the VPN client is installed at C:\
Orbi Whole Home AC1200 Mesh WiFi System If you do not change the VPN interface name, the VPN tunnel connection will fail. For more information about using OpenVPN on your Windows-based computer, visit https://openvpn.net/index.php/open-source/documentation/howto.html#quick. Install OpenVPN software on your Mac computer You must install this software on each Mac computer that you plan to use for VPN connections to your router. To install VPN client software on your Mac computer: 1.
Orbi Whole Home AC1200 Mesh WiFi System Install OpenVPN software on an iOS device You must install this software on each iOS device that you plan to use for VPN connections to your router. To install VPN client software on an iOS device: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin.
Orbi Whole Home AC1200 Mesh WiFi System To install VPN client software on an Android device: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VPN Service.
Orbi Whole Home AC1200 Mesh WiFi System connected. If both networks use the same LAN IP scheme, when the VPN tunnel is established, you cannot access your home router or your home network with the OpenVPN software. The default LAN IP address scheme for the router is 192.x.x.x.The most common IP schemes are 192.x.x.x, 172.x.x.x, and 10.x.x.x. If you experience a conflict, change the IP scheme either for your home network or for the network with the client VPN computer.
Orbi Whole Home AC1200 Mesh WiFi System Use VPN to access your Internet service at home When you’re away from home and you access the Internet, you usually use a local Internet service provider. For example, at a coffee shop you might be given a code that lets you use the coffee shop’s Internet service account to surf the web. Orbi Pro lets you use a VPN connection to access your own Internet service when you’re away from home.
Orbi Whole Home AC1200 Mesh WiFi System Block VPN client Internet access in the router By default, the router is set up to allow VPN connections only to your home network, not to the Internet service for your home network. If you changed this setting to allow Internet access, you can change it back. To allow VPN clients to access only your home network: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Orbi Whole Home AC1200 Mesh WiFi System 3. Right-click the icon and select Connect. 4. When the VPN connection is established, launch your Internet browser.
10 Troubleshooting This chapter provides information to help you diagnose and solve problems you might experience with your Orbi router or satellite. If you do not find the solution here, check the NETGEAR support site at netgear.com/support for product and contact information.
Orbi Whole Home AC1200 Mesh WiFi System Quick tips This section describes tips for troubleshooting some common problems. Sequence to restart your network When you restart your network, follow this sequence: 1. Turn off and unplug the modem. 2. Turn off the router. 3. Plug in the modem and turn it on. Wait two minutes. 4. Turn on the router and wait two minutes. WiFi settings Make sure that the WiFi settings in the WiFi-enabled computer or mobile device and the router match.
Orbi Whole Home AC1200 Mesh WiFi System To sync the router and the satellite: 1. Place the satellite in the same room as the Orbi router. Use this satellite location only during the sync process. 2. Connect the satellite to a power source. 3. Wait for the satellite LED to light solid white or magenta. 4. Press the Sync button on the router and then within two minutes, press the Sync button on the satellite. 5. Wait for the satellite to light.
Orbi Whole Home AC1200 Mesh WiFi System Cannot access the Internet Check your network and Internet connections: 1. Make sure that your WiFi-enabled computer or mobile device is connected to the Orbi network. 2. If you are connected to Orbi but you cannot access the Internet, check to see if your Internet connection is working. 3. Launch a web browser from a computer or WiFi device that is connected to the network. 4. Enter orbilogin.com. A login window opens. 5.
Orbi Whole Home AC1200 Mesh WiFi System • Your ISP might check for your computer’s host name. Assign the computer host name of your ISP account as the account name on the Internet Setup page. • If your ISP allows only one Ethernet MAC address to connect to Internet and checks for your computer’s MAC address, do one of the following: - Inform your ISP that you bought a new network device and ask them to use the router’s MAC address. - Configure your router to clone your computer’s MAC address.
Orbi Whole Home AC1200 Mesh WiFi System To troubleshoot a PPPoE connection: 1. Launch a web browser from a computer or WiFi device that is connected to the network. 2. Enter orbilogin.com. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Click the ADVANCED tab. The ADVANCED Home page displays. 5.
Orbi Whole Home AC1200 Mesh WiFi System • To view the WiFi settings for the router, use an Ethernet cable to connect a computer to the Ethernet port on the router. Then log in to the router, and select BASIC > Wireless. Note: Be sure to click the Apply button if you change settings.
Orbi Whole Home AC1200 Mesh WiFi System If the path is not functioning correctly, you might be experiencing one of the following problems: • Wrong physical connections Check that the appropriate LEDs are on for your network devices. If your router and computer are connected to a separate Ethernet switch, make sure that the link LEDs on the switch are lit for the switch ports that your computer and router are connected to.
Orbi Whole Home AC1200 Mesh WiFi System Many broadband ISPs restrict access by allowing traffic only from the MAC address of your broadband modem. Some ISPs additionally restrict access to the MAC address of a single computer connected to that modem. If your ISP does this, configure your router to “clone” or “spoof” the MAC address from the authorized computer.
11 Supplemental Information This appendix covers the following topics: • • Factory Settings Technical Specifications 134
Orbi Whole Home AC1200 Mesh WiFi System Factory Settings You can return your Orbi router or satellite to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router or satellite for at least seven seconds until the router or satellite LED blinks. The router or satellite resets, and returns to the factory settings. Factory Settings for Orbi Router Model RBR10 The following table shows the factory default settings for the router.
Orbi Whole Home AC1200 Mesh WiFi System Table 4.
Orbi Whole Home AC1200 Mesh WiFi System Table 5. Factory default settings for the satellite (Continued) Feature Internet connection Local network (LAN) Firewall Default Setting WAN MAC address Use default hardware address WAN MTU size 1500 Port speed AutoSensing LAN IP 192.168.1.250 Subnet mask 255.255.255.
Orbi Whole Home AC1200 Mesh WiFi System Table 5. Factory default settings for the satellite (Continued) Feature WiFi Default Setting WiFi communication Enabled SSID name See satellite label Security WPA2-PSK (AES) Broadcast SSID Enabled Transmission speed Auto2 Country/region United States of America; otherwise, varies by region RF channel 2.
Orbi Whole Home AC1200 Mesh WiFi System Table 6. Technical specifications for the router (Continued) Feature Description Dimensions 4.1 x 4.1 x 2.7 in. (104.14 x 104.14 x 68.58 mm) Weight 0.58 lb (263.
Orbi Whole Home AC1200 Mesh WiFi System Technical Specifications for Orbi Satellite Model RBS10 The following table shows the technical specifications for the satellite. Table 7. Technical specifications for the satellite Feature Description Data and routing protocols TCP/IP, DHCP, Dynamic DNS, and UPnP Power adapter North America: 120V, 60 Hz, input UK, Australia: 240V, 50 Hz, input Europe: 230V, 50 Hz, input All regions (output): 12V, 1A DC output Dimensions 4.1 x 4.1 x 2.7 in. (104.14 x 104.
Orbi Whole Home AC1200 Mesh WiFi System Table 7. Technical specifications for the satellite (Continued) Feature Description Operating frequency range 2.4 GHz: • 2.412–2.462 GHz (US) • 2.412–2.472 GHz (Europe ETSI) 5 GHz: • 5.18 GHz–5.24 GHz and 5.745 GHz–5.825 GHz (US) • 5.18 GHz–5.24 GHz and 5.5 GHz–5.7 GHz (Europe) • 5.26 GHz–5.32 GHz (Europe) 802.11 security WPA-PSK [TKIP], WPA2-PSK [AES] 4 Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary.
