User Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the network and access the router
- 3. Specify Your Internet Settings
- Use the Internet Setup Wizard
- Manually set up the Internet connection
- Get Multi-Gig Internet with Internet port aggregation
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use auto detect for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 pass-through Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Use auto config for an IPv6 Internet connection
- Set up an IPv6 6rd Internet connection
- Manage the MTU size
- 4. Control Access to the Internet
- Manage NETGEAR Armor
- Enable access control to allow or block access to the Internet
- Use keywords to block Internet sites
- Delete keywords from the blocked list
- Block services from the Internet
- Prevent blocking on a trusted computer
- Manage network access control lists
- Schedule when to block Internet sites and services
- Set up security event email notifications
- 5. Manage Network Settings
- View or change the WAN settings
- Set up a default DMZ server
- Change the Router’s Device Name
- Change the LAN TCP/IP settings
- Specify the IP addresses that the router assigns
- Disable the DHCP server feature in the router
- Manage reserved LAN IP addresses
- Use the WPS Wizard for WiFi connections
- Specify basic WiFi settings
- Change the WiFi mode
- Change the WiFi password or the WiFi security
- Set up a guest WiFi network
- Control the WiFi radios
- Set up a WiFi schedule
- Specify WPS settings
- Set up the router as a WiFi access point
- Set up a bridge for a port group or VLAN tag group
- Manage custom static routes
- Enable or disable airtime fairness
- Enable or disable MU-MIMO
- Enable or disable PMF
- Set up the router in bridge mode
- Manage Ethernet port aggregation to a LAN device
- 6. Optimize Performance
- 7. Manage Your Router
- Update the router firmware
- Change the admin password
- Enable admin password recovery
- Recover the admin password
- View information about the router and the Internet and WiFi settings
- Display the statistics of the Internet port
- Check the Internet connection status
- View and manage logs of router activity
- View devices currently on the network
- Monitor Internet traffic
- Manage the router configuration file
- Manage remote access
- Connect to your router with Anywhere Access
- Disable LED blinking or turn off LEDs
- Set your time zone
- Set the NTP Server
- Specify ReadyDLNA Media Server Settings
- Return the router to its factory default settings
- 8. Share USB Storage Devices Attached to the Router
- USB device requirements
- Connect a USB storage device to the router
- Access a storage device connected to the router from a Windows-based computer
- Map a USB device to a Windows network drive
- Access a storage device that is connected to the router from a Mac
- Back up Windows-based computers with ReadySHARE Vault
- Back up Mac computers with Time Machine
- Enable FTP access within your network
- View network folders on a storage device
- Add a network folder on a USB storage device
- Edit a network folder on a USB storage device
- Safely remove a USB storage device
- 9. Use Dynamic DNS to Access USB Storage Devices Through the Internet
- 10. Use VPN to Access Your Network
- 11. Use a VPN client to connect to a VPN server
- 12. Manage port forwarding and port triggering
- 13. Troubleshooting
- 14. Supplemental Information
Use auto config for an IPv6 Internet connection........................39
Set up an IPv6 6rd Internet connection.......................................40
Manage the MTU size.........................................................................42
MTU concepts.................................................................................42
Change the MTU size....................................................................43
Chapter 4 Control Access to the Internet
Manage NETGEAR Armor.................................................................46
Activate Armor using the Nighthawk app...................................46
View or change your NETGEAR Armor settings using the
Nighthawk app...............................................................................46
Enable access control to allow or block access to the Internet....47
Use keywords to block Internet sites...............................................48
Delete keywords from the blocked list............................................49
Block services from the Internet.......................................................50
Prevent blocking on a trusted computer.........................................51
Manage network access control lists...............................................52
Schedule when to block Internet sites and services......................52
Set up security event email notifications.........................................53
Chapter 5 Manage Network Settings
View or change the WAN settings....................................................56
Set up a default DMZ server..............................................................57
Change the Router’s Device Name..................................................58
Change the LAN TCP/IP settings......................................................58
Specify the IP addresses that the router assigns............................60
Disable the DHCP server feature in the router...............................61
Manage reserved LAN IP addresses................................................62
Reserve an IP address....................................................................62
Edit a reserved IP address............................................................63
Delete a reserved IP address entry..............................................63
Use the WPS Wizard for WiFi connections......................................64
Specify basic WiFi settings................................................................65
Change the WiFi mode......................................................................66
Change the WiFi password or the WiFi security.............................67
Set up a guest WiFi network.............................................................69
Control the WiFi radios......................................................................71
Use the WiFi On/Off button..........................................................72
Enable or disable the WiFi radios................................................72
Set up a WiFi schedule.......................................................................72
Specify WPS settings..........................................................................73
Set up the router as a WiFi access point..........................................74
Set up a bridge for a port group or VLAN tag group....................75
Set up a bridge for a port group..................................................75
4
Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router










