User Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the network and access the router
- 3. Specify Your Internet Settings
- Use the Internet Setup Wizard
- Manually set up the Internet connection
- Manage a Multi-Gig Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use auto detect for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 pass-through Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Use auto config for an IPv6 Internet connection
- Set up an IPv6 6rd Internet connection
- Manage the MTU size
- 4. Control Access to the Internet
- Manage NETGEAR Armor
- Enable access control to allow or block access to the Internet
- Use keywords to block Internet sites
- Delete keywords from the blocked list
- Block services from the Internet
- Prevent blocking on a trusted computer
- Manage network access control lists
- Schedule when to block Internet sites and services
- Set up security event email notifications
- 5. Manage Network Settings
- View or change the WAN settings
- Set up a default DMZ server
- Change the Router’s Device Name
- Change the LAN TCP/IP settings
- Specify the IP addresses that the router assigns
- Disable the DHCP server feature in the router
- Manage reserved LAN IP addresses
- Use the WPS Wizard for WiFi connections
- Specify basic WiFi settings
- Change the WiFi mode
- Change the WiFi password or the WiFi security
- Set up a guest WiFi network
- Control the WiFi radios
- Set up a WiFi schedule
- Set up the router as a WiFi access point
- Set up a bridge for a port group or VLAN tag group
- Manage custom static routes
- Enable or disable implicit beamforming
- Enable or disable airtime fairness
- Enable or disable MU-MIMO
- Set Up the Router in Bridge Mode
- Manage Ethernet Port Aggregation to a LAN Device
- 6. Optimize Performance
- 7. Manage Your Router
- Update the router firmware
- Change the admin password
- Enable admin password recovery
- Recover the admin password
- View information about the router and the Internet and WiFi settings
- Display the statistics of the Internet port
- Check the Internet connection status
- View and manage logs of router activity
- View devices currently on the network
- Monitor Internet traffic
- Manage the router configuration file
- Connect to your router with Anywhere Access
- Disable LED blinking or turn off LEDs
- Set your time zone
- Set the NTP Server
- Specify ReadyDLNA Media Server Settings
- Return the router to its factory default settings
- 8. Share USB Storage Devices Attached to the Router
- USB device requirements
- Connect a USB storage device to the router
- Access a storage device connected to the router from a Windows-based computer
- Map a USB device to a Windows network drive
- Access a storage device that is connected to the router from a Mac
- Enable FTP access within your network
- View network folders on a storage device
- Add a network folder on a USB storage device
- Edit a network folder on a USB storage device
- Safely remove a USB storage device
- 9. Use Dynamic DNS to Access USB Storage Devices Through the Internet
- 10. Use VPN to Access Your Network
- 11. Manage port forwarding and port triggering
- 12. Troubleshooting
- 13. Supplemental Information
Set up an IPv6 PPPoE Internet connection..................................40
Use auto config for an IPv6 Internet connection........................42
Set up an IPv6 6rd Internet connection.......................................44
Manage the MTU size.........................................................................45
MTU concepts.................................................................................45
Change the MTU size....................................................................47
Chapter 4 Control Access to the Internet
Manage NETGEAR Armor.................................................................49
Activate Armor using the Nighthawk app...................................49
View or change your NETGEAR Armor settings using the
Nighthawk app...............................................................................49
View or change your NETGEAR Armor settings from the Armor
portal...............................................................................................50
Enable access control to allow or block access to the Internet....50
Use keywords to block Internet sites...............................................51
Delete keywords from the blocked list............................................52
Block services from the Internet.......................................................53
Prevent blocking on a trusted computer.........................................54
Manage network access control lists...............................................55
Schedule when to block Internet sites and services......................56
Set up security event email notifications.........................................57
Chapter 5 Manage Network Settings
View or change the WAN settings....................................................60
Set up a default DMZ server..............................................................61
Change the Router’s Device Name..................................................62
Change the LAN TCP/IP settings......................................................62
Specify the IP addresses that the router assigns............................64
Disable the DHCP server feature in the router...............................65
Manage reserved LAN IP addresses................................................66
Reserve an IP address....................................................................66
Edit a reserved IP address............................................................67
Delete a reserved IP address entry..............................................67
Use the WPS Wizard for WiFi connections......................................68
Specify basic WiFi settings................................................................69
Change the WiFi mode......................................................................70
Change the WiFi mode if AX WiFi is enabled............................71
Change the WiFi mode if AX WiFi is disabled...........................72
Change the WiFi password or the WiFi security.............................74
Set up a guest WiFi network.............................................................76
Control the WiFi radios......................................................................78
Use the WiFi On/Off button..........................................................79
Enable or disable the WiFi radios................................................79
4
Nighthawk Tri-Band AX12 12-Stream AX WiFi Router