RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA 202-10463-01 March 2009 v1.
©2009 by NETGEAR, Inc. All rights reserved. Product Registration, Support, and Documentation Register your product at http://www.NETGEAR.com/register. Registration is required before you can use our telephone support service. Product updates and Web support are always available by going to: http://www.netgear.com/support. Setup documentation is available on the CD, on the support website, and on the documentation website.
NOTE: This product’s firmware limits operation to only the channels allowed in a particular Region or Country. Therefore, all options described in this user's guide may not be available in your version of the product. Europe – EU Declaration of Conformity Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC).
Nederlands [Dutch] Hierbij verklaart NETGEAR Inc. dat het toestel Radiolan in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, NETGEAR Inc., jiddikjara li dan Radiolan jikkonforma mal-htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Alulírott, NETGEAR Inc.
FCC Declaration Of Conformity We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that the model DGND3300 RangeMax Dual Band Wireless-N Modem Router complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation.
Product and Publication Details Model Number: DGND3300 Publication Date: March 2009 Product Family: Modem Router Product Name: RangeMax Dual Band Wireless-N Modem Router Home or Business Product: Home Language: English Publication Part Number: 202-10463-01 vi v1.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Contents About This Manual Conventions, Formats, and Scope ....................................................................................xi How to Use This Manual ..................................................................................................xii How to Print This Manual .................................................................................................xii Revision History ................................
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Chapter 3 Protecting Your Network Protecting Access to Your Modem Router ......................................................................3-1 Changing the Built-In Password ...............................................................................3-2 Restricting Access by MAC Address ..............................................................................3-2 Blocking Access to Internet Sites .....................................
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Configuring Static Routes .............................................................................................5-14 Wireless Repeating (Also Called WDS) .......................................................................5-16 Wireless Repeating Function .................................................................................5-17 Setting Up the Base Station .....................................................................
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual x v1.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual About This Manual The user manual provides information for configuring the features of the NETGEAR® RangeMax Dual Band Wireless-N Modem Router beyond initial configuration settings. Initial configuration instructions can be found in the Setup Manual. You should have basic to intermediate computer and Internet skills.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • Scope. This manual is written for the Dual Band Wireless-N Modem Router according to these specifications: Product Version RangeMax Dual Band Wireless-N Modem Router Manual Publication Date March 2009 For more information about network, Internet, firewall, and VPN technologies, see the links to the NETGEAR website in Appendix B, “Related Documents.” Note: Product updates are available on the NETGEAR, Inc. website at http://www.netgear.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual – – Printing a PDF chapter. Use the PDF of This Chapter link at the top left of any page. • Click the PDF of This Chapter link at the top left of any page in the chapter you want to print. The PDF version of the chapter you were viewing opens in a browser window. • Click the print icon in the upper left of your browser window. Printing a PDF version of the complete manual. Use the Complete PDF Manual link at the top left of any page.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual xiv v1.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Chapter 1 Configuring Your Internet Connection This chapter describes how to configure your Dual Band Wireless-N Modem Router Internet connection. When you install your modem router using the Resource CD as described in the Setup Manual, these settings are configured automatically for you. This chapter provides instructions on how to log in to the modem router for further configuration.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Logging In to Your Modem Router You can log in to the modem router to view or change its settings. Links to Knowledge Base and documentation are also available on the modem router main menu. Note: Your computer must be configured for DHCP. For help with configuring DHCP, see the documentation that came with your computer or see the link to the online document in “Preparing Your Network” in Appendix B.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • Checking for Firmware Updates screen. After initial configuration, this screen displays unless you previously cleared the Check for Updated Firmware Upon Log-in check box. Figure 1-2 If the modem router discovers a newer version of the firmware, you are asked if you want to upgrade to the new firmware (see “Upgrading the Firmware” on page 4-1 for details). If no new firmware is available, the following message displays.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual You can use the Setup Wizard to automatically detect your Internet connection as described in “Using the Setup Wizard” on page 1-4, or you can bypass the Setup Wizard and manually configure your Internet connection as described in “Viewing or Manually Configuring Your ISP Settings” on page 1-5.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Viewing or Manually Configuring Your ISP Settings To view or configure the basic settings: 1. Log in to the modem router as described in “Logging In to Your Modem Router” on page 1-2. 2. Select Basic Settings from the modem router menu to display the Basic Settings screen: Figure 1-6 3. Select Yes or No depending on whether your ISP requires a login. This selection changes the fields available on the Basic Settings screen. • Yes.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 5. If no login is required, you can specify the MAC Address setting. 6. Click Apply to save your settings. 7. Click Test to test your Internet connection. If the NETGEAR website does not appear within one minute, refer to. When your Internet connection is working, you do not need to launch the ISP’s login program on your computer to access the Internet.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 1-1. Basic Settings screen fields Settings Description Does Your ISP Require a Login? • Yes • No These fields Account Name appear only if no (If required) login is required. Domain Name (If required) Enter the account name provided by your ISP. This might also be called the host name. These fields Login appear only if your ISP Password requires a login. Service Name The login name provided by your ISP.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 1-1. Basic Settings screen fields (continued) Settings Description NAT (Net Address Translation) NAT automatically assigns private IP addresses (10.1.1.x) to LAN-connected devices. • Enable. Usually NAT is enabled. • Disable. This disables NAT, but leaves the firewall active. Disable NAT only if you are sure that you do not require it. When NAT is disabled, only standard routing is performed by this router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual NETGEAR recommends that you use the Setup Wizard to automatically detect and configure your ADSL settings. This usually works fine. However, if you have technical experience and are sure of the multiplexing method and virtual circuit number for the virtual path identifier (VPI) and virtual channel identifier (VCI), you can specify those settings here..
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 1-10 Configuring Your Internet Connection v1.
Chapter 2 Safeguarding Your Network For a wireless connection, the SSID, also called the wireless network name, and the wireless security setting must be the same for the modem router and wireless computers or wireless adapters. NETGEAR strongly recommends that you use wireless security. Warning: Computers can connect wirelessly at a range of several hundred feet. This can allow others outside of your immediate area to access your network.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual See “Manually Configuring Your Wireless Settings” on page 2-4. • Push 'N' Connect (WPS) automatically implements wireless security on the modem router while, at the same time, allowing you to automatically implement wireless security on any WPS-enabled devices (such as wireless computers and wireless adapter cards). You activate WPS by pressing a WPS button on the modem router, clicking an onscreen WPS button, or entering a PIN number.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • If using multiple access points, it is better if adjacent access points use different radio frequency channels to reduce interference. The recommended channel spacing between adjacent access points is 5 channels (for example, use Channels 1 and 6, or 6 and 11). The time it takes to establish a wireless connection can vary depending on both your security settings and placement. WEP connections can take slightly longer to establish.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual For more information about wireless technology, see the link to the online document in “Wireless Networking Basics” in Appendix B. Manually Configuring Your Wireless Settings You can view or manually configure the wireless settings for the modem router in the Wireless Settings screen. If you want to make changes, make sure to note the current settings first.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 4. For initial configuration and test, leave the other settings unchanged. 5. To save your changes, click Apply. 6. Configure and test your computers for wireless connectivity. Program the wireless adapter of your computers to have the same SSID and wireless security settings as your modem router. Check that they have a wireless link and are able to obtain an IP address by DHCP from the modem router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 2-1. Wireless Settings (continued) Settings Description Security Options • Disable. You can use this setting to establish wireless connectivity before implementing wireless security. NETGEAR strongly recommends that you implement wireless security. • WEP (Wired Equivalent Privacy). Use encryption keys and data encryption for data security. Select 64-bit or 128-bit encryption. See “Configuring WEP Wireless Security.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 3. In the Security Options section, select the WEP radio button: Figure 2-3 4. Select the Authentication Type: Automatic, Open System, or Shared Key. The default is Open System. Note: The authentication scheme is separate from the data encryption. You can select an authentication scheme that requires a shared key but still leaves the data transmissions unencrypted.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • Passphrase. To use a passphrase to generate the keys, enter a passphrase, and click Generate. This automatically creates the keys. Wireless stations must use the passphrase or keys to access the modem router. Note: Not all wireless adapters support passphrase key generation. • Key 1-Key4. These values are not case-sensitive. You can manually enter the four data encryption keys.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual To configure WPA or WPA2 in the modem router: 1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default user name of admin and default password of password, or using whatever user name, password, and LAN address you have chosen for the modem router. 2. Select Wireless Settings from the main menu. 3. On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your choice.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • Shared Key. This is shared between the wireless access point and the Radius server during authentication. 7. To save your settings, click Apply.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Using a WPS Button to Add a WPS Client Any wireless computer or wireless adapter that will connect to the modem router wirelessly is a client. The client must support a WPS button, and must have a WPS configuration utility, such as the NETGEAR Smart Wizard or Atheros Jumpstart. To use the modem router WPS button to add a WPS client: 1. Log in to the modem router at its default LAN address of http://192.168.0.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual To access the Internet from any computer connected to your modem router, launch a browser such as Microsoft Internet Explorer or Mozilla Firefox. You should see the modem router’s Internet LED blink, indicating communication to the ISP. Note: If no WPS-capable client devices are located during the 2-minute time frame, the SSID will not be changed, and no security will be implemented on the modem router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 4. Go to the client wireless computer. Run a WPS configuration utility. Follow the utility’s instructions to generate a PIN. Take note of the client PIN. 5. From the modem router Add WPS Client screen, enter the client PIN number, and then click Next. • The modem router tries to communicate with the client for 4 minutes. • The modem router WPS screen displays a message confirming that the client was added to the wireless network.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual The WPS settings show the modem router PIN, Disable Router’s PIN, and the Keep Existing Wireless Settings check box. By default, the Keep Existing Wireless Settings check box is cleared. This allows the modem router to automatically generate the SSID and WPA/WPA2 security settings when it implements WPS.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Adding Both WPS and Non-WPS Clients For non-WPS clients, you cannot use the WPS setup procedures to add them to the wireless network. You must record, and then manually enter your security settings (see “Manually Configuring Your Wireless Settings” on page 2-4). To connect a combination of non-WPS enabled and WPS-Enabled clients to the modem router: 1.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Restricting Access to Your Modem Router You can use the Advanced Wireless Settings screen to enable or disable the wireless router radio and the SSID broadcast. From the main menu, select Advanced Wireless Settings to display the following screen: Figure 2-8 • Enable Wireless Router Radio. You can completely turn off the wireless portion of the modem router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • WPS Settings. These are Push 'N' connect settings used by the modem router when WPS clients are added. – Router’s PIN. The number that the modem router broadcasts when adding a WPS client with the PIN method. – Disable Router PIN. Selecting this checkbox disables the modem router’s PIN. – Keep Existing Wireless Settings.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 2-18 Safeguarding Your Network v1.
Chapter 3 Protecting Your Network This chapter describes how to use the content filtering and reporting features of the RangeMax Dual Band Wireless-N Modem Router to protect your network.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Changing the Built-In Password 1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default user name of admin, default password of password, or using whatever password and LAN address you have chosen for the modem router. 2. From the main menu, under the Maintenance heading, select Set Password to display the Set Password screen: 3.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 2. From the main menu, under the Advanced heading, select Wireless Settings, and then click Setup Access List to display the Wireless Card Access List screen. Figure 3-1 The Wireless Station Access List screen displays a list of wireless PC’s that are allowed to connect to the modem router based on their MAC addresses. These wireless PCs must also have the correct SSID and wireless security settings to access the wireless network. 3.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 4. You can select a wireless station from the Available Wireless Stations list, or you can enter its MAC address manually: • If the wireless station is shown in the Available Wireless Stations list, click its radio button to select it, and then click Add. • To manually specify the wireless station, in the Add New Station Manually section, enter the name of the wireless station and its MAC address.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual To block access to Internet sites: 1. Select Block Sites under Security in the main menu. The Block Sites screen displays. Figure 3-3 2. Enable keyword blocking by selecting either Per Schedule or Always. To block by schedule, be sure to specify a time period in the Schedule screen. For information about scheduling, see “Scheduling Blocking” on page 3-10. Block all access to Internet browsing during a scheduled period by entering a dot (.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Firewall Rules You can use this screen to create firewall rules to block or allow specific traffic. This feature is for advanced administrators only! Incorrect configuration will cause serious problems. The Firewall Rules screen lists all existing rules for outbound traffic and inbound traffic. If you have not defined any rules, only the default rules are listed. You can add or edit rules.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Depending on your selection, either the Outbound Services screen or Inbound Services screen is displayed. Figure 3-5 2. Select the service that you want to add or edit. 3. Enter the settings to specify the service (see Table 3-1 on page 3-7). 4. Click Apply to have your changes take effect. The new rule will be listed in the table when you return to the Firewall Rules screen. Table 3-1.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 3-1. Adding or Editing Firewall Service Rules (continued) Field Outbound Rules Inbound Rules LAN users (Outbound Services only) These settings determine which computers on your network are affected by this rule, based on their source (LAN) IP address. Select the desired option: • Any. All local IP addresses are covered by this rule. • Address range. If this option is selected, you must enter the Start and Finish fields.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual To block access to Internet services: 1. Select Services under Security in the main menu. The Services screen displays. Figure 3-6 2. To add a service, click Add Custom Service. The following screen displays. Figure 3-7 3. Enter a name for the service. 4. From the Service Type drop-down list, select the application or service to be allowed or blocked. If you know that the application uses either TCP or UDP, select the appropriate protocol.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Scheduling Blocking To schedule blocking: 1. Select Schedule under Security in the main menu. The Schedule screen displays. Figure 3-8 2. Configure the schedule for blocking keywords and services. a. Days. Select days on which you want to apply blocking by selecting the appropriate check boxes. Select Every Day to select the check boxes for all days. Click Apply. b. Time of Day. Select a start and end time in 24-hour format.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Viewing Logs of Web Access or Attempted Web Access The log is a detailed record of the websites you have accessed or attempted to access. Up to 128 entries are stored in the log. Log entries appear only when keyword blocking is enabled and no log entries are made for the trusted user. Select Logs under Security in the main menu. The Logs screen displays. Figure 3-9 Table 3-2.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual To refresh the log screen, click the Refresh button. To clear the log entries, click the Clear Log button. To e-mail the log immediately, click the Send Log button. Configuring E-mail Alert and Web Access Log Notifications To receive logs and alerts by e-mail, you must provide your e-mail account information. To configure e-mail alert and web access log notifications: 1. Select E-mail under Security in the main menu.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 3. If your outgoing e-mail server requires authentication, select the My Mail Server requires authentication check box. a. Enter your user name for the outgoing e-mail server in the User Name field. b. Enter your password for the outgoing e-mail server in the Password field. 4. You can specify that logs are automatically sent by e-mail with these options: • Send alert immediately.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 3-14 Protecting Your Network v1.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Chapter 4 Using Network Monitoring Tools This chapter describes features to help you manage your RangeMax Dual Band Wireless-N Modem Router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Note: To turn off the automatic firmware check at log in, clear the Check for Updated Firmware Upon Log-in check box on the Router Upgrade screen. If the modem router discovers a newer version of firmware, the message on the left displays. If no new firmware is available, the message on the right displays. Figure 4-2 To upgrade, click Yes to allow the modem router to download and install the new firmware.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 3. If the firmware version on the NETGEAR website is newer than the firmware on your modem router, download the file to your computer. 4. Under Maintenance on the modem router main menu, select Router Upgrade to display the following screen: Figure 4-3 5. Click Browse, and locate the firmware you downloaded (the file ends in .img or .chk). 6. Click Upload to send the firmware to the modem router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Viewing Modem Router Status Information To view modem router status and usage information, from the main menu, under the Maintenance heading, select Router Status. The Router Status screen displays. Figure 4-4 You can use the Show Statics and Connection Status buttons to view additional status information, as described in “Connection Status” on page 4-6 and “Statistics” on page 4-7. The following table explains Router Status screen fields.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 4-1. Modem Router Status Fields Field Description Account Name The host name assigned to the modem router. Firmware Version The version of the modem router firmware. It changes if you upgrade the modem router. Internet Port MAC Address The Media Access Control address. This is the unique physical address being used by the Internet (WAN) port of the modem router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 4-1. Modem Router Status Fields (continued) Field Wireless Port (continued) Description 11G Channel Identifies the 11G channel of the wireless port being used. Click the link to the online document “Wireless Networking Basics” in Appendix B for the frequencies used on each channel. In Up to 270Mbps at 2.4GHz mode and Up to 130Mbps at 2.4GHz mode, the 11G channel is not active.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual The following table describes the connection status settings. Table 4-2. Connection Status Settings Item Description Connection Time The time elapsed since the last connection to the Internet through the ADSL port. Connecting to sender The connection status. Negotiation Success or Failed. Authentication Success or Failed. Obtaining IP Address The IP address assigned to the WAN port by the ADSL Internet Service Provider.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 4-3. Modem Router Statistics (continued) Item Description Status The link status of the port. TxPkts The number of packets transmitted on this port since reset or manual clear. RxPkts The number of packets received on this port since reset or manual clear. Collisions The number of collisions on this port since reset or manual clear. Tx B/s The current transmission (outbound) bandwidth used on the WAN and LAN ports.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Managing the Configuration File The configuration settings of the Dual Band Wireless-N Modem Router are stored within the modem router in a configuration file. You can back up (save) this file to your computer, restore it, or reset it to the factory default settings. From the main menu, under Maintenance, select Backup Settings. Figure 4-8 The following sections describe the available options.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual To restore your settings from a saved configuration file, enter the full path to the file on your computer, or click Browse to browse to the file. When you have located it, click Restore to send the file to the modem router. The modem router then reboots automatically. Warning: Do not interrupt the reboot process.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Running Diagnostic Utilities and Rebooting the Modem Router The modem router has a diagnostics feature. In the main menu, under Maintenance, select Diagnostics to display the following screen. Figure 4-9 You can use the Diagnostics screen to perform the following functions from the modem router: • Ping an IP address to test connectivity to see if you can reach a remote host.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Enabling Remote Management Access The remote management feature allows you to upgrade or check the status of your Dual Band Wireless-N Modem Router via the Internet. From the main menu, under Advanced, select Remote Management. Figure 4-10 Note: Be sure to change the modem router’s default configuration password to a very secure password.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 2. Under Allow Remote Access By, specify what external IP addresses will be allowed to access the modem router’s remote management. Note: For enhanced security, restrict access to as few external IP addresses as practical. • To allow access from any IP address on the Internet, select Everyone. • To allow access from a range of IP addresses on the Internet, select IP Address Range.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 4-14 Using Network Monitoring Tools v1.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Chapter 5 Customizing Your Network Settings This chapter describes advanced features of the RangeMax Dual Band Wireless-N Modem Router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual To configure LAN IP settings, log in to the modem router, and under the Advanced heading, select LAN Setup. The following screen displays: Figure 5-1 If you make changes you must click Apply in order for the changes to take effect. Note: If you change the LAN IP address of the modem router while connected through the browser, you will be disconnected. You must then open a new connection to the new IP address and log in again.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 5-1. LAN Setup Settings LAN TCP/IP Setup DHCP Server For more information Description IP Address The LAN IP address of the modem router. IP Subnet Mask The LAN subnet mask of the modem router. Combined with the IP address, the IP Subnet Mask allows a device to know which other addresses are local to it, and which must be reached through a gateway or modem router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Using the Modem Router as a DHCP Server By default, the modem router functions as a DHCP server, allowing it to assign IP, DNS server, and default gateway addresses to all computers connected to the modem router’s LAN. The assigned default gateway address is the LAN address of the modem router. The modem router assigns IP addresses to the attached computers from a pool of addresses specified in this screen.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 2. In the IP Address field, type the IP address to assign to the computer or server. (Choose an IP address from the modem router’s LAN subnet, such as 192.168.0.x.) 3. Type the MAC address of the computer or server. Tip: If the computer is already present on your network, you can copy its MAC address from the Attached Devices screen and paste it here. 4. Click Apply to enter the reserved address into the table.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual changes, your modem router automatically contacts the Dynamic DNS service provider, logs in to your account, and registers your new IP address. If your host name is hostname, for example, you can reach your modem router at hostname.dyndns.org. From the main menu, under Advanced, select Dynamic DNS to display the Dynamic DNS screen. Figure 5-2 To configure Dynamic DNS: 1.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Configuring the WAN Setup Options The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the Maximum Transmit Unit (MTU) size, and enable the modem router to respond to a ping on the WAN (Internet) port. From the main menu, under Advanced, click WAN Setup to view the WAN Setup screen. Figure 5-3 The WAN Setup fields are described in the following table: Table 5-2.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 5-2. WAN Setup Settings Setting Description Respond to Ping on Internet If you want the modem router to respond to a ping from the Internet, select this WAN Port check box. This should be used only as a diagnostic tool, since it allows your modem router to be discovered. Do not select this check box unless you have a specific reason to do so.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Setting up Quality of Service (QoS) Quality of Service (QoS) is an advanced feature that can be used to prioritize some types of traffic ahead of others. The modem router can provide QoS prioritization over the wireless link and on the Internet connection. The modem router supports Wi-Fi Multimedia Quality of Service (WMM QoS) to prioritize wireless voice and video traffic over the wireless link.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual QoS for Applications and Online Gaming To create a QoS policy for traffic for specific applications or online games: 1. From the main menu, under Advanced, select QoS Setup. The QoS Setup screen displays. 2. Click Setup QoS rule. The QoS - Priority Rules screen displays. Figure 5-5 3. Click Add Priority Rule. The QoS - Priority Rules screen displays. 4.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 5. You can select an existing item, or you can scroll to the bottom of the list and select Add a New Application or Add a New Game. a. If you chose to add a new entry, the screen expands as shown: Figure 5-7 b. In the QoS Policy for field, enter a descriptive name for the new application or game. c.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 3. In the Priority Category field, select Ethernet LAN Port. The screen changes: Figure 5-8 4. In the LAN port field, select the LAN port that will have a QoS policy. 5. From the Priority drop-down list, select the priority that this port’s traffic should receive relative to other applications and traffic when accessing the Internet. The options are Low, Normal, High, and Highest. 6.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 3. In the Priority Category field, select MAC Address. The screen changes: Figure 5-9 4. If the device to be prioritized appears in the MAC Device List, select it. The information from the MAC Device List is used to populate the policy name, MAC Address, and Device Name fields. If the device does not appear in the MAC Device List, click Refresh. If it still does not appear, you must complete these fields manually. 5.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Configuring Static Routes Static routes provide additional routing information to your modem router. Under usual circumstances, the modem router has adequate routing information after it has been configured for Internet access, and you do not need to configure additional static routes. You must configure static routes only for unusual cases such as multiple routers or multiple IP subnets located on your network.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Select Static Routes under Advanced in the main menu. The Static Routes screen displays. Figure 5-10 To add or edit a static route: 1. Click Add to open the Static Routes screen. Figure 5-11 2. In the Route Name field, type a name for this static route. (This is for identification purposes only.) 3. Select the Private check box if you want to limit access to the LAN only. If Private is selected, the static route is not reported in RIP. 4.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Wireless Repeating (Also Called WDS) The Dual Band Wireless-N Modem Router can be used with a wireless access point (AP) to build large bridged wireless networks. Wireless repeating is a type of Wireless Distribution System (WDS). Warning: If you use the wireless repeating function, your options for wireless security are limited to None or WEP. For more information about wireless security, see Chapter 2, “Safeguarding Your Network.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • When the modem router is in dual band mode (the Mode field on the Wireless Settings screen is set to Up to 270 Mbps at 5 GHz and 54 Mbps at 2.4 GHz), the WDS function works only in 5GHz 11N mode. To use the 2.4GHz 11g protocol with WDS, set the Mode field in the Wireless Settings screen to Up to 270 Mbps at 2.4 GHz. If you make changes in the Wireless Settings screen, click Apply so that they take effect.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual If this check box is selected, the modem router communicates wirelessly only with other APs whose MAC addresses are listed in this screen. The modem router still communicates with wire-connected LAN devices. Setting Up the Base Station The wireless repeating function works only in hub and spoke mode. The units cannot be daisy chained. You must know the wireless settings for both units. You must know the MAC address of the remote unit.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Setting Up a Repeater Unit Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless connection to the base station. Note: If you are using the DGND3300 base station with a non-NETGEAR modem router as the repeater, you might need to change additional configuration settings. In particular, you should disable the DHCP server function on the wireless repeater AP.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 5-20 Customizing Your Network Settings v1.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Chapter 6 Fine-Tuning Your Network This chapter describes features to help you manage your RangeMax Dual Band Wireless-N Modem Router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • Powerline. For connecting rooms or floors that are blocked by obstructions or are distant vertically, consider networking over your building’s AC wiring. NETGEAR’s Powerline HD family of products delivers up to 200 Mbps to any outlet, while the older-generation XE family of products delivers 14 Mbps or 85 Mbps.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • Backing up computers over the network has become popular due to the availability of inexpensive mass storage. Table 6-1 shows the time to transfer 1 gigabyte (GB) of data using various networking technologies. Table 6-1.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Next, consider the throughput of your network devices. Where possible, make the heaviest-traffic connections using higher-speed technologies, with no lower-speed bottlenecks in the path. RangeMax Dual Band Wireless-N Modem Router Figure 6-1 Figure 6-1 shows a sample network using multiple networking technologies.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Optimizing Wireless Performance The speed and operating distance or range of your wireless connection can vary significantly based on the physical placement of the wireless router. You should choose a location for your router that will maximize the network speed. Note: Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the router.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • • • Microwave ovens (no closer than 10 feet) Choose your settings. – Use a scanning utility to determine what other wireless networks are operating nearby, and choose an unused channel. – Turn off SSID broadcast, and change the default SSID. Other nearby devices might automatically try to connect to your network several times a second, which can cause significant performance reduction.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are willing to experiment, you can gradually reduce the MTU from the maximum value of 1500 until the problem goes away. Table 6-2 describes common MTU sizes and applications. Table 6-2. Common MTU Sizes MTU Application 1500 The largest Ethernet packet size and the default value.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual To turn on Universal Plug and Play: 1. From the main menu, under Advanced, click UPnP. The UPnP screen displays. Figure 6-2 2. The available settings and information in this screen are: • Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration. The default setting for UPnP is disabled.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Chapter 7 Troubleshooting This chapter provides information about troubleshooting your RangeMax Dual Band Wireless-N Modem Router. After each problem description, instructions are provided to help you diagnose and solve the problem. As a first step, review the Quick Tips. Tip: NETGEAR provides helpful articles, documentation, and the latest firmware updates at http://www.netgear.com/support.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 7-1. Quick Tips (continued) Recommendation Instructions Make sure that the Ethernet cables are securely plugged in. For each powered-on computer connected to the modem router by an Ethernet cable, the corresponding numbered router LAN port LED is on. Make sure that the wireless settings in the computer and router match exactly.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • The Wireless LEDs are lit. If any of the above conditions does not occur, see the following table. Table 7-2. Troubleshooting with the LEDs Situation Recommended Action Power LED is off. If the Power and other LEDs are off when your router is turned on: • Make sure that the power cord is properly connected to your router and that the power supply adapter is properly connected to a functioning power outlet.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 7-2. Troubleshooting with the LEDs Situation Recommended Action The Ethernet port LEDs are off. If the Ethernet port LEDs do not light when the Ethernet connection is made, check the following: • Make sure that the Ethernet cable connections are secure at the modem router and computer. • Make sure that power is turned on to the connected modem or computer. Wireless LEDs are off.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual If the modem router does not save changes you have made in the modem router menu, check the following: • When entering configuration settings, be sure to click the Apply button before moving to another screen, or your changes are lost. • Click the Refresh or Reload button in the Web browser. The changes may have occurred, but the Web browser may be caching the old configuration.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual 2. Access the main menu of the router at http://www.routerlogin.net. 3. Under Maintenance, select Router Status. 4. Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router has not obtained an IP address from your ISP.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual • You might be running login software that is no longer needed. If your ISP provided a program to log you in to the Internet (such as WinPoET), you no longer need to run that software after installing your modem router. You might need to go to Internet Explorer and select Tools > Internet Options, click the Connections tab, and select Never dial a connection.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual – • Check that the corresponding Link LEDs are on for your network interface card. If your router and computer are connected to a separate Ethernet switch, make sure the Link LEDs are on for the switch ports that are connected to your computer and router. Wrong network configuration – Verify that the Ethernet card driver software and TCP/IP software are both installed and configured on your computer.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Problems with Date and Time Under Security in the main menu, select Schedule to view the current date and time of day. The modem router uses the Network Time Protocol (NTP) to obtain the current time from one of several network time servers on the Internet. Each entry in the log is stamped with the date and time of day. Problems with the date and time function can include the following: • Date shown is January 1, 2000.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Viewing Available Networks If your wireless computer is configured for the network, but you cannot connect, use the computer’s wireless setup program to scan for available wireless networks. Look for network names (SSIDs) of NETGEAR-DualBand-N and NETGEAR-2.4-G, or your custom SSIDs if you have changed them.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Appendix A Default Configuration and Technical Specifications This appendix provides factory default settings and technical specifications for the RangeMax Dual Band Wireless-N Modem Router. Restoring the Factory Configuration Settings Note: This procedure erases your current configuration, including your wireless security. When you log in after resetting, you will be prompted to configure these settings.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table A-1. Default Configuration Settings Feature Default Setting Router login Modem Router login URL http://www.routerlogin.net or http://www.routerlogin.com User name (case-sensitive) admin Password (case-sensitive) password Internet connection WAN MAC address Use default address WAN MTU size 1458 for Annex A World except NA, 1492 for Annex A NA and Annex B ADSL line rate automatically negotiated Local network (LAN) LAN IP 192.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table A-1. Default Configuration Settings (continued) Feature Default Setting Wireless Wireless communication Enabled Name (11N SSID) NETGEAR-Dual Band-N Name (11G SSID) NETGEAR-2.4G Security Disabled Broadcast SSID Enabled Country/Region United States in the North America, otherwise varies by region. For Annex B, Germany is default region. 11N Channel 36/5.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table A-1. Specifications (continued) Environmental Operating temperature 0° to 40° C (32º to 104º F) Operating humidity 10% to 90% relative humidity, noncondensing Storage temperature -20° to 70° C (-4º to 158º F) Regulatory Compliance Meets requirements of FCC Part 15 Class B; VCCI Class B; EN 55 022 (CISPR 22), Class B Interface Specifications A-4 LAN 10BASE-T or 100BASE-Tx, RJ-45 WAN (ADSL) ITU 992.1 (G.dmt) Annex A, ITU 992.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Appendix B Related Documents This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document Link TCP/IP Networking Basics http://documentation.netgear.com/reference/enu/tcpip/index.htm Wireless Networking Basics http://documentation.netgear.com/reference/enu/wireless/index.htm Preparing Your Network http://documentation.netgear.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual B-2 Related Documents v1.
Index A access blocking 3-4 remote 4-12 restricting by MAC address 3-2 viewing logs 3-11 configuring DMZ server 5-8 dynamic DNS 5-6 repeater unit 5-19 connection status settings 4-7 connection types 6-1 access points 5-16 CTS/RTS Threshold 2-16 account name 4-5 customer support ii address reservation 5-4 ADSL settings 1-9 D advertisement period 6-8 data packets, fragmented 6-6 attached devices 4-8 date and time, troubleshooting 7-9 authentication, required by mail server 3-13 daylight savings
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual E IP addresses auto-generated 7-4 current 4-5 dynamic 5-5 reserved 5-4 e-mailing logs 3-12 IP subnet mask 4-5 erasing configuration 4-10 italic text xi dynamic DNS 5-5 DynDNS.org 5-5 Ethernet cables, checking 7-2 Ethernet light, troubleshooting and 7-4 K Ethernet MAC address.
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual MTU size 6-6 multicasting 5-3 multiple input, multiple output (MIMO) 6-1 N Q Quality of Service (QoS) 5-9 applications and online gaming 5-10 editing or deleting policies 5-13 MAC address 5-12 router LAN ports 5-11 NAT (Network Address Translation) 5-8 network correct settings, checking 7-2 restarting 7-2 R Network Time Protocol (NTP) 3-13, 7-9 range, router 6-5 radio, wireless 2-16 reducing interference 6-5 O reference documents B-1
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual technical A-1 WDS 5-16, 5-17 speed requirements 6-2 WEP, configuring 2-6 SSID 4-6 wireless manually configuring settings 2-4 range and interference 2-2 SSID broadcast 2-16 static routes 5-14 status, router, viewing 4-4 streaming video and audio 6-2 subnet mask 4-5 system up time 4-7 T TCP/IP network, troubleshooting 7-7 wireless card, setting up 7-9 wireless connection type 6-1 Wireless Distribution System (WDS) 5-16 Wireless light, tro
