User Manual

Logs are sent automatically according to the schedule that you set. If the log fills before the specified
time, it is sent. After the log is sent, it is cleared from the router memory. If the router cannot email the
log and the log buffer fills, the router overwrites the log.
Set Up IP-MAC Binding
This features is available only in the China and Russa regions.
To set IP-MAC ginding:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > ARP Protection/IPMAC Binding.
The ARP Protection/IPMAC Binding page displays. By default, the IP-MAC binding feature is turned off.
5. To turn on this feature, select the Enable check box.
6. Click the Apply button.
The IP address reservation table becomes the IPMAC binding table. The router is set to use a static
ARP table for the LAN environment and no longer recieves ARP replies from LAN ports. Internet access
is granted only to LAN devices that are registered in the IP binding table.
Control Access to the Internet
53
Nighthawk X4S AC2600 Smart WiFi Router