User Manual

• Block all new devices from connecting. With this setting, if you add a new device, before it can
access your network, you must enter its MAC address for an Ethernet connection and its MAC
address for a WiFi connection in the allowed list.
The access rule does not affect previously blocked or allowed devices. It applies only to devices joining
your network in the future after you apply these settings.
7. To view allowed or blocked devices that are not connected, click one of the following links:
• View list of allowed devices not currently connected to the network
• View list of blocked devices not currently connected to the network
The list displays.
8. To allow the computer or device you’re currently using to continue to access the network, select the
check box next to your computer or device, and click the Allow button.
9. Click the Apply button.
Your settings are saved.
Use Keywords to Block Internet Sites
You can use keywords to block certain Internet sites from your network.You can use blocking all the time
or based on a schedule.
To block Internet sites:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security >Block Sites.
Control Access to the Internet
45
Nighthawk X4S AC2600 Smart WiFi Router