User Manual

Table 4. R7800 router specifications (Continued)
DescriptionFeature
FCC Part 15 Class B
EN 55 022 (CISPR 22), Class B C-Tick N10947
Electromagnetic emissions
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45LAN
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45WAN
Maximum WiFi signal rate complies with the IEEE 802.11 standard.
2
Wireless
Auto Rate SensingRadio data rates
• IEEE® 802.11 b/g/n 2.4 GHz–256 QAM support
• IEEE® 802.11 a/n/ac 5.0 GHz
Data encoding standards
Limited by the amount of WiFi network traffic generated by each node (typically
50–70 nodes).
Maximum computers per WiFi
network
AC2600 WiFi
3
• 800 Mbps @2.4GHz–256 QAM
• 1733 Mbps @5 GHz 11ac
Operating frequency range
WPA2-PSK and WPA/WPA2802.11 security
• Band 1. 36, 40, 44, and 48
• Band 2 (supports DFS). 52, 56, 60, and 64
• Band 3 (supports DFS). 100, 104, 108, 112, 116, 120, 124, 128, 132, 136,
and 140
• Band 4. 149,153,157, and 161
FCC Channels
2
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
3
NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future
standards. 802.11ac 1733 Mbps is approximately 4x faster than 802.11n 450 Mbps. 2.4 GHz Performance Mode requires
256 QAM support on the WiFi client. Up to 1733 Mbps wireless speeds achieved when connecting to other 802.11ac 1733
Mbps devices.
Supplemental Information
173
Nighthawk X4S AC2600 Smart WiFi Router