Operation Manual

Specify Your Internet Settings

Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST

The BASIC Home page displays.

4. Select ADV

ANCED > Advanced Setup > VLAN/IPTV Setup.

The VLAN/IPTV Setup page displays:

5. Select the Enable VLAN / Bridge group check box.

6. Select the By bridge group radio button.

7. Select a Wired Ports check box or a Wireless check box:

• If your device is connected to an Ethernet port on the DST router, select a Wired

Ports check box that corresponds to the Ethernet port on the DST router to which the

device is connected.

• If your device is connected to your DST router’

s WiFi network, select a Wireless

check box that corresponds to the DST router’s WiFi network to which the device is

connected.

Note: You must select at least one Wired Ports or Wireless check box. You

can select more than one check box.

8. Click the Apply button.

Your settings are saved.

Add VLAN Tag Groups

You can add VLAN tag groups to the bridge and assign VLAN IDs and priority values to each

VLAN tag group.

If you add a VLAN tag group to the bridge, packets sent between the device and the DST

router’s Internet port are not processed through the router’s network address translation

(NAT) or firewall.

 To add a VLAN tag group:

1. Launch a web browser from a computer or WiFi device that is connected to the network.