Operation Manual

Specify Your Internet Settings

Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST

The IPv6 page displays.

5. In the Internet Connection T

ype menu, select PPPoE.

The router automatically detects the information in the following fields:

• Router’s IPv6 Address on WAN.

This field shows the IPv6 address that is acquired

for the router’s WAN (or Internet) interface. The number after the slash (/) is the

length of the prefix, which is also indicated by the underline (_) under the IPv6

address. If no address is acquired, the field displays Not Available.

• Router’s IPv6 Address on LAN.

This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

6. In the Login field, enter the login information for the ISP connection.

This is usually the name that you use in your email address. For example, if your main

mail account is JerAB@ISP

.com, you would enter JerAB in this field. Some ISPs (like

Mindspring, Earthlink, and T-DSL) require that you use your full email address when you

7. In the Password field, enter the password for the ISP connection.

8. In the Service Name field, enter a service name.

If your ISP did not provide a service name, leave this field blank.