Operation Manual

Specify Your Internet Settings

Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST

Set Up an IPv6 DHCP Internet Connection

 To set up an IPv6 Internet connection with a DHCP server:

1. Launch a web browser from a computer or WiFi device that is connected to the network.

2. Enter http://www

.routerlogin.net.

A login window displays.

3. Enter the DST router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home page displays.

4. Select ADV

ANCED > Advanced Setup > IPv6.

The IPv6 page displays.

5. In the Internet Connection T

ype menu, select DHCP.

The DST router automatically detects the information in the following fields:

• Router’s IPv6 Address on WAN.

This field shows the IPv6 address that is acquired

for the DST router’s WAN (or Internet) interface. The number after the slash (/) is the

length of the prefix, which is also indicated by the underline (_) under the IPv6

address. If no address is acquired, the field displays Not Available.

• Router’s IPv6 Address on LAN.

This field shows the IPv6 address that is acquired

for the DST router’s LAN interface. The number after the slash (/) is the length of the

prefix, which is also indicated by the underline (_) under the IPv6 address. If no

address is acquired, the field displays Not Available.

6. Select an IPv6 Domain Name Server (DNS)

Address radio button: