Operation Manual

Specify Your Internet Settings
55
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your
ISP automatically assigns this address.
• Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
7. Select an IP Address Assignment radio button:
• Use DHCP Server. The DST router assigns IPv6 addresses to the devices on your
home network (the LAN) through a DHCP server.This method passes more
information to LAN devices, but some IPv6 systems might not support the DHCv6
client function.
• Auto Config. This is the default setting.
8. To specify the interface ID for the IPv6 address of the DST router's LAN interface, select the
Use This Interface ID check box and enter the interface ID.
If you do not specify an ID here, the DST router generates one automatically from its
MAC address.
9. Click the Apply button.
Your settings are saved.
Set Up an IPv6 6to4 Tunnel Internet Connection
The remote relay router is the router to which your DST router creates a 6to4 tunnel. Make
sure that the IPv4 Internet connection is working before you apply the 6to4 tunnel settings for
the IPv6 connection.
 To set up an IPv6 Internet connection by using a 6to4 tunnel:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the DST router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.