Operation Manual

Specify Your Internet Settings

Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST

The BASIC Home page displays.

4. Select ADV

ANCED > Advanced Setup > IPv6.

The IPv6 page displays.

5. In the Internet Connection T

ype menu, select Auto Detect.

The DST router automatically detects the information in the following fields:

• Connection Type.

This field indicates the connection type that is detected.

• Router’s IPv6 Address on WAN.

This field shows the IPv6 address that is acquired

for the DST router’s WAN (or Internet) interface. The number after the slash (/) is the

length of the prefix, which is also indicated by the underline (_) under the IPv6

address. If no address is acquired, the field displays Not Available.

• Router’s IPv6 Address on LAN.

This field shows the IPv6 address that is acquired

for the DST router’s LAN interface. The number after the slash (/) is the length of the

prefix, which is also indicated by the underline (_) under the IPv6 address. If no

address is acquired, the field displays Not Available.

6. Select

an IP Address Assignment radio button:

• Use DHCP Server.

The DST router assigns IPv6 addresses to the devices on your

home network (the LAN) through a DHCP server.This method passes more

information to LAN devices, but some IPv6 systems might not support the DHCv6

client function.

• Auto Config.

This is the default setting.

7. T

o specify the interface ID for the IPv6 address of the DST router's LAN interface, select the

Use This Interface ID check box and enter the interface ID.

If you do not specify an ID here, the DST router generates one automatically from its

MAC address.

8. Click the Apply button.

Your settings are saved.