Operation Manual

Specify Your Internet Settings
48
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
If the NETGEAR website does not display within one minute, see Chapter 18, DST
Router Troubleshooting.
Specify an Internet Connection That Uses a Login
 To view or change the basic Internet setup:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www
.routerlogin.net.
A login window displays.
3. Enter the DST router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
Scroll to
view more
settings
5. For the Does your Internet connection require a login setting, select the Yes radio
button.
The page adjusts.
6. In the Internet Service Provider menu, select the encapsulation method: PPPoE, PPTP, or
L2TP.
7. In the Login field, enter the login name your ISP gave you.
This login name is often an email address.
8. In the Password field, type the password that you use to log in to your Internet service.
9. If your ISP requires a service name, type it in the Service Name (if Required) field.
10. In the Connection Mode menu, select Always
On, Dial on Demand, or Manually
Connect.
11. T
o change the number of minutes until the Internet login times out, in the Idle Timeout (In
minutes) field, type the number of minutes.